Frelander 2. Manual — part 55
Stage 1:
Stage 2:
Release the hood support struts and secure the hood in
an upright position.
2.
3.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
3.
Remove the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
4.
5. CAUTIONS:
Discard the bolt.
Do not use air tools to install the bolt. Failure to
follow this instruction may result in damage to the
component.
Torque:
45 Nm
60°
5.
6.
CAUTION: Do not use a hammer to detach the
halfshaft from the hub assembly, failure to follow this
instruction may result in damage to the halfshaft.
Partially release the front halfshaft from the wheel
knuckle.
Special Tool(s):
205-857
6.
7.
WARNING: Make sure that a new nut is
installed.
CAUTION: Make sure that the ball joint ball does
not rotate.
Torque: 60 Nm
7.
Torque: 5 Nm
8.
9.
WARNING: Make sure that a new tie-rod end
nut is installed.
CAUTION: Make sure that the ball joint ball does
not rotate.
Torque: 80 Nm
9.
Special Tool(s):
211-316
10.
11.
CAUTION: Make sure that no load is placed on
the brake hose.
Torque: 200 Nm
11.
Torque: 35 Nm
12.
Torque: 10 Nm
13.
14. NOTE: This step requires the aid of another
technician.
Special Tool(s):
204-619
14.
Torque: 110 Nm
15.
Special Tool(s):
204-159
16.
17. CAUTIONS:
Do not allow halfshafts to hang unsupported at
one end or joint damage will occur.
Do not use a hammer to detach the halfshaft
from the hub assembly, failure to follow this instruction
may result in damage to the halfshaft.
17.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст