Frelander 2. Manual — part 287
9.
Remove the fuel filter.
Refer to:
Fuel Filter
(310-01B Fuel Tank and Lines - TD4 2.2L Diesel,
Removal and Installation).
10.
11.
12.
13.
14.
15.
16.
17.
18.
Installation
1.
CAUTION: A new O-ring seal is to be installed.
Install the crankcase vent oil separator.
Torque: 10 Nm
1.
Install the crankcase vent oil separator, wiring harness bracket.
Torque: 10 Nm
2.
3. NOTE: Install new retaining clips.
Connect the crankcase vent hoses.
3.
Install the crankcase vent oil separator to cylinder block, bracket.
Torque:
M6 10 Nm
M8 25 Nm
4.
Install the fuel filter brackets.
Torque: 25 Nm
5.
Attach the oil level indicator tube.
Torque: 10 Nm
6.
Install the fuel filter.
7.
Refer to:
Fuel Filter
(310-01B Fuel Tank and Lines - TD4 2.2L Diesel,
Removal and Installation).
8. NOTE: Install a new retaining clip.
Inatall the engine oil filler tube.
Torque: 10 Nm
8.
Install the intake manifold adaptor.
Torque: 6 Nm
9.
Install the intake manifold adaptor, wiring harness bracket.
Torque: 10 Nm
10.
11. CAUTIONS:
"Make sure that a new component is installed. "
Make sure that the mating faces are clean and free of foreign
material.
Install the EGR pipe.
Torque: 10 Nm
11.
Install the breather line.
12.
Install the throttle body.
Refer to:
Throttle Body
(303-04B Fuel Charging and Controls - TD4
2.2L Diesel, Removal and Installation).
13.
Connect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
14.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст