Frelander 2. Manual — part 93
Item
Part Number
Description
1
-
Bearing anchorage - diesel derivative
Bearing Anchorage - Petrol Derivative
Item
Part Number
Description
1
-
Bearing anchorage - petrol derivative
An extension shaft attached to the right-hand halfshaft is supported by a bearing anchorage arrangement. The bearing
anchorage on the diesel and petrol derivatives are of different construction, each designed to support the specific engine
torque loadings.
Front Drive Halfshafts - Front Drive Halfshafts
Diagnosis and Testing
For additional information.
REFER to:
Driveline System
(205-00 Driveline System - General Information, Diagnosis and Testing).
Front Drive Halfshafts - Front Halfshaft LH
Removal and Installation
Special Tool(s)
204-619
G-Clamp
205-754A
Splitter, Ball Joints
205-857
Remover, Halfshaft
Removal
• NOTE: The seal protector is not a special tool but is available from the parts catalogue.
Remove the plenum chamber panel.
Refer to:
Plenum Chamber
(412-01 Climate Control, Removal and
Installation).
1.
Release the hood support struts and secure the hood in
an upright position.
2.
3.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
3.
Remove the wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
4.
Stage 1:
Stage 2:
5.
WARNING: Make sure that a new nut is
installed.
Torque: 60 Nm
5.
6. NOTE: This step requires the aid of another
technician.
Compress the spring and damper assembly.
Special Tool(s):
204-619
6.
7.
WARNING: Make sure that a new bolt is
installed.
Torque:
45 Nm
60°
7.
Partially release the halfshaft from the wheel knuckle.
Special Tool(s):
205-857
8.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст