Frelander 2. Manual — part 220
Engine - TD4 2.2L Diesel - Engine Upper Support Insulator
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Torque: 10 Nm
1.
Torque: 110 Nm
2.
Installation
To install, reverse the removal procedure.
1.
Engine - TD4 2.2L Diesel - Engine Lower Support Insulator
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the engine undershield.
Refer to:
Engine Undershield
(501-02 Front End Body Panels,
Removal and Installation).
2.
3.
CAUTION: Make sure that these components
are installed to the noted removal position.
Remove the lower support insulator.
Torque: 110 Nm
3.
Vehicles with petrol engine
4. NOTE: Do not disassemble further if the component
is removed for access only.
Remove the heat shield.
Torque: 10 Nm
4.
All vehicles
Remove the engine mount link brackets.
Torque: 110 Nm
5.
Installation
To install, reverse the removal procedure.
1.
Engine - TD4 2.2L Diesel - Oil Pan Extension
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
Remove the engine cover.
Refer to:
Engine Cover - TD4 2.2L Diesel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
2.
Remove the oil pan.
Refer to:
Oil Pan
(303-01B Engine - TD4 2.2L Diesel, Removal and
Installation).
3.
4. NOTE: Remove and discard the O-ring seal.
Remove the dipstick tube.
4.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст