Frelander 2. Manual — part 526
Body Closures - Power Liftgate Switch
Removal and Installation
Removal
Remove the liftgate trim panel.
Refer to:
Liftgate Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
Remove the license plate lamp housing.
2.
Remove and discard the 6 license plate housing
gaskets.
3.
Remove the license plate lamps.
4.
Remove the power liftgate switch.
5.
Installation
Install the power liftgate switch.
1.
Install the license plate lamps.
2.
Install the license plate housing and tighten the nuts.
Torque: 5 Nm
3.
Install the liftgate trim panel.
Refer to:
Liftgate Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
4.
Body Closures - Liftgate
Removal and Installation
Removal
Remove the LH D-pillar upper trim panel.
Refer to:
D-Pillar Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
Release the rear of the headliner.
2.
3.
Release the liftgate wiring harness.
4.
5.
6.
WARNING: This step requires the aid of
another technician.
CAUTION: Mark the components to aid
installation.
Remove the liftgate.
6.
Installation
1.
WARNING: This step requires the aid of another technician.
CAUTION: Make sure that the area around the component is
clean and free of foreign material.
Install the liftgate.
Torque: 24 Nm
1.
Connect the washer jet hose.
2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст