Frelander 2. Manual — part 208
5. CAUTIONS:
Make sure that the area around the component is
clean and free of foreign material.
Take extra care not to damage the mating faces.
Special Tool(s):
303-538
,
308-615
,
100-012
5.
Installation
1.
CAUTION: Take extra care not to damage the
seal.
Special Tool(s):
303-1271
1.
Manual models: Install the flywheel.
Refer to:
Flywheel
(303-01B Engine - TD4 2.2L Diesel, Removal and
Installation).
2.
Automatic models: Install the flexplate.
Refer to:
Flexplate
(303-01B Engine - TD4 2.2L Diesel, Removal and
Installation).
3.
Connect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
4.
Engine - TD4 2.2L Diesel - Timing Cover
Removal and Installation
Removal
• NOTE: Removal steps in this procedure may contain installation details.
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Remove the reluctor ring.
Refer to:
Crankshaft Position (CKP) Sensor Ring
(303-14B Electronic
Engine Controls - TD4 2.2L Diesel, Removal and Installation).
3.
Remove the engine cover.
Refer to:
Engine Cover - TD4 2.2L Diesel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
4.
5.
6.
Torque: 7 Nm
7.
Torque: 7 Nm
8.
9.
CAUTION: Make sure that the wiring harnesses
are correctly located.
Torque: 6 Nm
9.
Torque: 6 Nm
10.
11. NOTE: Do not disassemble further if the component
is removed for access only.
11.
Installation
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст