Frelander 2. Manual — part 97
Rear Drive Halfshafts -
General Specification
Item
Specification
Type
Fully floating, solid shafts with inner and outer constant velocity joints
Recommended Lubricant
Item
Specification
Inboard joint
Use grease supplied with replacement boot kit
Outboard joint
Use grease supplied with replacement boot kit
Torque Specifications
Description
Nm
lb-ft
Halfshaft nut*+
395
291
* New nuts/bolts must be fitted
+ Stake nut on completion
Rear Drive Halfshafts - Rear Drive Halfshafts
Description and Operation
COMPONENT LOCATION
Item
Part Number
Description
1
-
Halfshaft - RH (right-hand)
2
-
Halfshaft - LH (left-hand)
OVERVIEW
Constant Velocity Joints
Item
Part Number
Description
A
-
Inner constant velocity joint
B
-
Outer constant velocity joint
Each halfshaft comprises a solid steel shaft with inner and outer constant velocity joints.
The inner joint is the 'tripode' type with spherical bushing to reduce sliding resistance; the shaft and inner joint are one
assembly.
The outer joint is the 'ball and socket' type, with a splined connection between the joint and the shaft. The joints are
packed with grease and protected by gaiters.
The halfshafts are of equal length to eliminate stiffness-related torque-steer.
Rear Drive Halfshafts - Rear Drive Halfshafts
Diagnosis and Testing
For additional information.
REFER to:
Driveline System
(205-00 Driveline System - General Information, Diagnosis and Testing).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст