Frelander 2. Manual — part 180
Engine - I6 3.2L Petrol - Crankshaft Rear Seal
Removal and Installation
Special Tool(s)
303-1291
Installer, Crankshaft Rear Seal
Removal
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Remove the flexplate.
Refer to:
Flexplate
(303-01A Engine - I6 3.2L Petrol, Removal and
Installation).
3.
4.
CAUTION: Discard the seal.
4.
Installation
1. CAUTIONS:
Extreme cleanliness must be exercised when
handling this component.
"Make sure that a new component is installed. "
Install the crankshaft rear seal.
Special Tool(s):
303-1291
1.
2. CAUTIONS:
Extreme cleanliness must be exercised when handling these
components.
Make sure that new bolts are installed.
Install the flexplate.
Refer to:
Flexplate
(303-01A Engine - I6 3.2L Petrol, Removal and
Installation).
2.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
3.
Engine - I6 3.2L Petrol - Flexplate
Removal and Installation
Removal
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
2.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
2.
Remove the transmission and converter.
Refer to:
Transmission - I6 3.2L Petrol
(307-01 Automatic
Transmission/Transaxle, Removal).
3.
Remove the flexplate.
4.
Installation
Stage 1:
Stage 2:
1. CAUTIONS:
Extreme cleanliness must be exercised when
handling these components.
Make sure that new bolts are installed.
Install the flexplate and tighten the bolts as
illustrated.
Torque:
45 Nm
50°
1.
Install the transmission and converter.
Refer to:
Transmission - I6 3.2L Petrol
(307-01 Automatic
Transmission/Transaxle, Removal).
2.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
3.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст