Frelander 2. Manual — part 675

Disconnect the RH catalyst monitor sensor electrical connector.

6.

Release the catalyst monitor sensor wiring harness.

7.

8.

CAUTION: Make sure that the ball joint ball does not rotate.

Disconnect both front stabilizer bar links from the lower suspension arm.

8.

Using the special tool, release the LH and RH tie-rod end ball joints.

Special Tool(s):

211-316

9.

10.

CAUTION: Be prepared to collect escaping fluids.

• NOTE: Make sure that all openings are sealed.

Disconnect the pressure lines from the power steering gear.

10.

Release the PAS lines.

11.

12.

WARNING: Make sure that a new steering column flexible

coupling bolt is installed.

Disconnect the lower steering column from the steering gear.

12.

Release the downpipe catalytic converters.

13.

Release the LH and RH lower suspension arms.

14.

Release the purge line from the subframe.

15.

Release the fuel line.

16.

Support the subframe.

General Equipment:

Powertrain Jack

17.

18.

CAUTION: Make sure that new subframe bolts are installed.

Remove the front subframe cross-brace.

18.

19. CAUTIONS:

Mark the components to aid installation.

Make sure that new subframe bolts are installed.

Lower the front subframe assembly.

19.

Remove the stabilizer bar.

20.