Defender. Manual — part 253
Seating - Front Seat Backrest
Removal and Installation
Removal
CAUTION: Do not attempt to adjust or dismantle the front seat tilt mechanism, the front seat backrest must be
replaced as a complete assembly, failure to follow this instruction may result in damage to the vehicle.
1. Remove the front seat cushion.
For additional information, refer to:
Front Seat Cushion
(501-
10 Seating, Removal and Installation).
2. Remove the front seat backrest hinge cover.
Remove the front seat recliner handle.
3. Remove the front seat backrest hinge clip.
4. Release the front seat heater mat wiring harness.
Remove and discard the 2 cable ties.
5. NOTE: Discard the nuts.
5. NOTE: Discard the nuts.
Remove the front seat backrest.
Remove the 2 nuts and bolts.
Installation
1. NOTE: New nuts must be installed.
Install the front seat backrest.
Tighten the nuts and bolts to 23 Nm (17 lb.ft).
2. Secure the front seat heater mat wiring harness.
Install new cable ties.
3. Install the front seat backrest hinge clip.
4. Install the front seat backrest hinge cover.
Install the front seat recliner handle.
Seating - Front Seat Backrest Cover
Removal and Installation
Removal
1. Remove the front seat head restraint.
Release the 2 clips.
2. Remove the front seat head restraint guides.
Turn the front seat head restraint guides 90 degrees
counter clockwise.
3. Release the front seat cover lower closing strip.
4. Remove the front seat backrest cover.
Remove and discard the 11 hog rings.
Installation
1.
CAUTION: Care must be taken when installing the hog
rings, failure to follow this instruction may result in damage to
the vehicle.
• NOTE: Use hog ring pliers to close the hog rings. Do not use
any other tool. The hog rings must be closed to overlap as
illustrated.
To install, reverse the removal procedure.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст