Defender. Manual — part 212
2. Tighten to 2 Nm (1 lb.ft).
3. Tighten to 15 Nm (11 lb.ft).
4. Tighten to 8 Nm (6 lb.ft).
5. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01
Battery, Mounting and Cables, General Procedures).
Air Conditioning - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma -
Condenser Fan
Removal and Installation
Removal
1. Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and
Connect
(414-01 Battery, Mounting and Cables, General
Procedures).
2. Remove the radiator grille.
For additional information, refer to:
Radiator Grille
(501-08
Exterior Trim and Ornamentation, Removal and Installation).
3. Disconnect the condenser fan electrical connector.
4. Release the condenser fan electrical connector.
5. Remove the condenser fan.
Remove the 4 bolts.
Installation
1. To install, reverse the removal procedure.
1. To install, reverse the removal procedure.
Tighten to 2 Nm (1 lb.ft).
2. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01
Battery, Mounting and Cables, General Procedures).
Air Conditioning - 2.4L Duratorq-TDCi HPCR (103kW/140PS) - Puma - De-
Icing Switch
Removal and Installation
Removal
1. Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and
Connect
(414-01 Battery, Mounting and Cables, General
Procedures).
2. Remove the evaporator core.
For additional information, refer to:
Evaporator Core
(412-03
Air Conditioning - 2.4L Duratorq-TDCi HPCR (103kW/140PS) -
Puma, Removal and Installation).
3. Remove the de-icing switch from the evaporator core.
Installation
1. To install, reverse the removal procedure.
2. Connect the battery ground cable.
For additional information, refer to:
Battery Connect
(414-01
Battery, Mounting and Cables, General Procedures).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст