Freelander Body Repair Manual — part 31
BODY
22
DOORS
LATCH - FRONT DOOR - 3 DOOR
Service repair no - 76.37.12
Remove
1. Remove upper water shedder.
See this
section.
2. Remove sill button lock rod from latch.
3. Release control rod from exterior handle.
4. Disconnect multiplug from latch.
5. Remove 3 Torx screws from latch
6. On driver’s door, release door lock barrel
paddle from latch.
7. Remove latch from aperture.
8. Open latch security flap.
9. Release interior release cable clamp from
latch.
10. Disengage interior release cable from latch.
Refit
1. Secure interior release cable to latch and close
latch security flap.
2. Fit interior release cable clamp to latch.
3. Position latch to door. On driver’s door, align
lock barrel paddle to latch.
4. Fit and tighten Torx screws securing latch.
5. Connect multiplug to latch.
6. Connect exterior handle control rod to latch.
7. Fit sill button lock rod to latch.
8. Check operation of latch.
9. Fit front door water shedder.
See this section.
BODY
DOORS
23
LATCH - FRONT DOOR - 5 DOOR
Service repair no - 76.37.12
Remove
1. Remove water shedder from front door.
See
this section.
2. Remove sill button lock rod from latch.
3. Release control rod from exterior handle.
4. Disconnect multiplug from latch.
5. Remove 2 screws securing RH glass cable
guide and position guide aside.
6. Remove 3 Torx screws from latch
7. On driver’s door, release door lock barrel
paddle from latch.
8. Remove latch from aperture.
9. Open latch security flap.
10. Release interior release cable clamp from
latch.
11. Disengage interior release cable from latch.
Refit
1. Secure interior release cable to latch and close
latch security flap.
2. Fit interior release cable clamp to latch.
3. Position latch to door. On driver’s door, align
lock barrel paddle to latch.
4. Fit and tighten Torx screws securing latch.
5. Position RH glass cable guide and tighten
screws.
6. Connect multiplug to door latch.
7. Connect exterior handle control rod to latch.
8. Fit sill button lock rod to latch.
9. Check operation of door latch.
10. Fit front door water shedder.
See this section.
BODY
24
DOORS
LATCH - REAR DOOR
Service repair no - 76.37.13
Remove
1. Remove rear door water shedder
See this
section.
2. Release exterior handle control rod from latch.
3. Release sill button lock rod and remove lock
rod.
4. Disconnect multiplug from latch.
5. Remove 3 Torx screws securing latch.
6. Remove latch through aperture.
7. Open latch security flap.
8. Release interior release cable clamp from
latch.
9. Disengage interior release cable from latch.
Refit
1. Secure interior release cable to latch and close
latch security flap.
2. Position latch to door, fit and tighten torx
screws.
3. Connect multiplug to latch.
4. Connect exterior handle control rod to latch.
5. Fit and secure sill button lock rod.
6. Check operation of latch.
7. Fit water shedder.
See this section.
BODY
DOORS
25
LATCH - TAIL DOOR
Service repair no - 76.37.16
Remove
1. Remove tail door water shedder.
See this
section.
2. Remove 4 screws securing door latch.
3. Release door latch to access harness clips and
multiplugs.
4. Disconnect 2 multiplugs from door latch.
5. Release door harness clip from latch.
6. Remove door latch.
7. Remove screw from solenoid motor and
remove motor from latch.
Refit
1. Position solenoid motor to latch, fit and tighten
screw.
2. Position door latch, connect multiplugs and
harness clips.
3. Locate door latch in position, fit and tighten
screws.
4. Fit water shedder.
See this section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст