Freelander Body Repair Manual — part 30
BODY
18
DOORS
WATER SHEDDER - UPPER - 3 DOOR
Service repair no - 76.34.24
NOTE: Always replace a damaged water
shedder.
Remove
1. Remove front door casing.
See this section.
2. Release and discard water shedder.
Refit
1. Clean door contact area with white spirit.
2. Position NEW water shedder to door and seal
in position, by applying hand pressure to centre
bottom of shedder first then move out from this
point in both directions applying an even
pressure to the seal, smooth out any creases.
CAUTION: It is crucial that no creases are
present along the base of the water
shedder.
NOTE: To obtain an effective seal when
fitting a new water shedder, ensure that
the water shedder and door contact
surface are at room temperature: 18
°
C to 30
°
C.
3. Fit front door casing.
See this section.
BODY
DOORS
19
WATER SHEDDER - TAIL DOOR
Service repair no - 76.34.25
NOTE: Always replace a damaged water
shedder.
Remove
1. Remove tail door casing.
See this section.
2. Release and discard water shedder.
Refit
1. Clean door contact area with white spirit.
2. Position NEW water shedder to door and seal
in position, by applying hand pressure to centre
bottom of shedder first then move out from this
point in both directions applying an even
pressure to the seal, smooth out any creases.
CAUTION: It is crucial that no creases are
present along the base of the water
shedder.
NOTE: To obtain an effective seal when
fitting a new water shedder, ensure that
the water shedder and door contact
surface are at room temperature: 18
°
C to 30
°
C.
3. Fit tail door casing.
See this section.
BODY
20
DOORS
WATER SHEDDER - FRONT DOOR - 5 DOOR
Service repair no - 76.34.26
NOTE: Always replace a damaged water
shedder.
Remove
1. Remove front door speaker.
See
ELECTRICAL, Repairs.
2. Noting their fitted position, remove door casing
retainers.
3. Release and discard water shedder.
Refit
1. Clean door contact area with white spirit.
2. Position NEW water shedder to door and seal
in position, by applying hand pressure to centre
bottom of shedder first then move out from this
point in both directions applying an even
pressure to the seal, smooth out any creases.
CAUTION: It is crucial that no creases are
present along the base of the water
shedder.
NOTE: To obtain an effective seal when
fitting a new water shedder, ensure that
the water shedder and door contact
surface are at room temperature: 18
°
C to 30
°
C.
3. Fit door casing retainers.
4. Fit front door speaker.
See ELECTRICAL,
Repairs.
BODY
DOORS
21
WATER SHEDDER - REAR DOOR
Service repair no - 76.34.28
NOTE: Always replace a damaged water
shedder.
Remove
1. Remove rear door speaker.
See
ELECTRICAL, Repairs.
2. Noting their fitted position, remove 10 trim stud
retainers and 2 door pull securing screw
retainers.
3. Release and discard water shedder.
Refit
1. Clean door contact area with white spirit.
2. Position NEW water shedder to door and seal
in position, by applying hand pressure to centre
bottom of shedder first then move out from this
point in both directions applying and even
pressure to the seal, smooth out any creases.
CAUTION: It is crucial that no creases are
present along the base of the water
shedder.
NOTE: To obtain an effective seal when
fitting a new water shedder, ensure that
the water shedder and door contact
surface are at room temperature: between 18
°
C
to 30
°
.
3. Fit 10 trim stud retainers and 2 door pull
securing screw retainers.
4. Fit rear door speaker.
See ELECTRICAL,
Repairs.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст