Freelander Body Repair Manual — part 42
BODY
INTERIOR TRIM COMPONENTS
15
Models without passenger airbag:
24. Remove 4 nuts from grab handle and remove
handle.
Models with passenger airbag:
25. Remove 2 screws from airbag lower finisher
and remove finisher.
All models:
26. Remove 4 screws from centre bracket and
remove bracket.
27. Remove 4 face level vents and collect seals.
28. Remove glove box hinge pins and remove
glove box lids.
29. Remove glove box lamp and mat.
30. Remove 4 screws from glove box and remove
glove box.
31. Remove 2 screws from each glove box lock
and remove locks.
32. Remove switch blank.
33. Noting their fitted positions, remove 11 spire
nuts and 3 harness clips.
34. Remove fascia and coin tray mats.
BODY
16
INTERIOR TRIM COMPONENTS
35. Fit fascia and coin tray mats to replacement
fascia. Ensure mats are fully located in
position.
36. Fit spire nuts and harness clips.
37. Fit switch blank.
38. Fit glove box locks and secure with screws.
39. Fit glove box and secure with screws.
40. Fit glove box lamp and mat.
41. Fit glove box lids and secure hinge pins.
42. Position seals to face level vents and fit vents.
43. Fit centre bracket and secure with screws.
Models without passenger airbag:
44. Fit grab handle and secure with nuts.
Models with passenger airbag:
45. Fit airbag lower finisher and secure with
screws.
All models:
46. Fit instrument pack lower cover and secure
with screws.
47. Fit instrument pack and secure with screws.
48. Position harness and secure harness in clips.
49. Fit mirror and headlamp leveling switches.
50. Feed harness through fascia and connect
multiplugs to instrument pack, mirror switch
and headlamp leveling switch.
51. Connect Lucars to glove box lamp and switch.
52. Fit instrument upper cover and secure with
screws.
53. Position instrument bezel finisher, connect
multiplugs and secure finisher with screws.
Refit
1. With assistance position fascia.
2. Fit and tighten screws.
Models without passenger airbag:
3. Fit fascia stowage box.
See this section.
Models with passenger airbag:
4. Fit passenger airbag.
See RESTRAINT
SYSTEMS, Repairs.
All models:
5. Fit ’A’ post finishers.
See this section.
6. Fit clock.
See ELECTRICAL, Repairs.
7. Open driver’s glove box lid and connect
multiplugs to fuse box.
8. Fit fuse box cover and close glove box lid.
9. Fit steering column lower finisher and secure
with screws.
10. Fit wiper/indicator switch and tighten clamping
screw.
11. Connect multiplugs to wiper/indicator switch.
12. Fit rotary coupler.
See RESTRAINT
SYSTEMS, Repairs.
13. Fit front console
See this section.
BODY
INTERIOR TRIM COMPONENTS
17
STOWAGE BOX - FASCIA
Service repair no - 76.46.45
Remove
1. Remove mat from stowage box to access
screws.
2. Remove 2 screws.
3. Remove stowage box form fascia.
Refit
1. Position stowage box and secure with screws.
2. Fit mat to stowage box.
BODY
18
INTERIOR TRIM COMPONENTS
CARPET - LOADSPACE
Service repair no - 76.49.04
Remove
1. Remove both rear quarter lower trim casings.
See this section.
2. Open lid on security box.
3. Remove 6 screws securing lid.
4. Remove lid.
5. Remove 4 screws securing lid latch strikers.
6. Remove both strikers.
7. Release carpet from rear seat strikers and
lashing eyes.
8. Remove 4 buckles from rear carpet.
9. Remove carpet.
Refit
1. Position carpet in loadspace.
2. Fit buckles to rear carpet.
3. Fit lid latch strikers and secure with screws.
4. Fit lid and secure with screws.
5. Close lid.
6. Fit rear quarter lower trim casings.
See this
section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст