Freelander Body Repair Manual — part 47
BODY
SEATS AND SEAT BELTS
7
9. Remove 2 Torx bolts from seat belt/seat belt
buckle. Remove seat belt/seat belt buckle from
frame.
10. Remove cover and pad from frame.
11. Remove and discard 17 hog rings and remove
cover from pad.
Refit
1. Position cover to pad and secure with NEW
hog rings.
2. Position seat belt/seat belt buckle on frame
and tighten Torx bolts to 40 Nm.
3. Fit cover and pad to frame.
4. Fit front and sides of cushion cover to frame.
5. Fit rear of cushion cover to frame.
6. Fit cushion to squab and tighten Torx bolts.
7. Fit end covers and tighten screws.
8. Position seat belt reel in seat squab and
tighten nut to 32 Nm.
9. Fit seat belt reel cover and tighten screws.
10. Fit rear seat.
See this section.
BODY
8
SEATS AND SEAT BELTS
CUSHION COVER - REAR SEAT - 3 DOOR
Service repair no - 78.40.05
Remove
1. Remove rear seat assembly.
See this section.
2. Remove 2 screws securing console cover and
remove cover.
3. Remove 4 screws securing rear seat console
and remove console.
4. Remove 4 screws securing end covers and
remove covers.
5. Remove 4 Torx bolts and remove squab
assembly from cushion assembly.
6. Release back board assembly from squab
frame and remove back board.
7. Release rear of cushion cover from frame.
8. Release sides and front of cushion cover from
frame.
BODY
SEATS AND SEAT BELTS
9
9. Remove cover and pad from frame.
10. Release cushion cover from pad.
11. Remove and discard 13 hog rings and remove
cover from pad.
Refit
1. Position cover to pad and secure with NEW
hog rings.
2. Fit cover to pad.
3. Position cover and pad and secure to frame.
4. Fit cushion to squab and tighten Torx bolts to
45 Nm.
5. Position back board and secure to frame.
6. Fit end covers and tighten screws.
7. Position rear seat console, fit and tighten
screws.
8. Position console cover, fit and tighten screws.
9. Fit rear seat.
See this section.
BODY
10
SEATS AND SEAT BELTS
CUSHION COVER - LH REAR SEAT - 5 DOOR
Service repair no - 78.40.05
Remove
1. Remove LH rear seat.
See this section.
2. Remove 5 screws and remove both end
covers.
3. Remove 3 Torx bolts and remove squab from
cushion.
4. Release rear of cushion cover from frame.
5. Release sides and front of cushion cover from
frame.
6. Remove cover and pad from frame.
7. Remove and discard 16 hog rings and remove
cover from pad.
Refit
1. Position cover to pad and secure with NEW
hog rings.
2. Fit cover and pad to frame.
3. Fit front and sides of cushion cover to frame.
4. Fit rear of cushion cover to frame.
5. Fit cushion to squab and tighten Torx bolts to
45 Nm.
6. Fit end covers and tighten screws.
7. Fit rear seat.
See this section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст