Freelander Body Repair Manual — part 46
BODY
SEATS AND SEAT BELTS
3
CUSHION AND SQUAB - REAR SEAT - 3 DOOR
Service repair no - 78.10.57/99
Remove
1. Remove 2 Torx bolts securing seat to heel
board.
2. Fold seat forward and remove 2 Torx bolts
from seat hinges.
3. With assistance, remove seat.
Refit
1. With assistance, position seat in vehicle and
align hinges.
2. Fit Torx bolts and lower seat. Tighten Torx
bolts to 25 Nm..
3. Fit Torx bolts to heel board. Tighten Torx bolts
to 25 Nm..
BODY
4
SEATS AND SEAT BELTS
CUSHION COVER - FRONT SEAT
Service repair no - 78.30.01
Remove
1. Remove front seat.
See this section.
2. Remove recline control knob.
3. Release retaining studs from side covers and
remove covers.
4. Remove 4 Torx bolts from squab frame and
remove squab frame from cushion frame.
5. Release sides of cushion cover from frame.
6. Release front of cushion cover from frame.
7. Release rear of cushion cover from frame.
8. Release rear of cushion pad from frame.
9. Remove cushion cover and pad.
BODY
SEATS AND SEAT BELTS
5
10. Remove and discard 12 hog rings holding
cushion cover to cushion pad.
11. Remove cushion cover.
Refit
1. Position cushion cover to pad.
2. Pull cover into position and secure with NEW
hog rings.
3. Position cushion cover and pad and secure to
frame.
4. Fit squab frame to cushion frame and tighten
Torx bolts to 45etorq>.
5. Fit side covers and secure retaining studs.
6. Fit recline control knob.
7. Fit front seat.
See this section.
BODY
6
SEATS AND SEAT BELTS
CUSHION COVER - RH REAR SEAT - 5 DOOR
Service repair no - 78.40.04
Remove
1. Remove RH rear seat.
See this section.
2. Remove 2 screws and remove seat belt reel
cover.
3. Remove nut and release seat belt belt reel.
4. Remove 5 screws and remove both end
covers.
5. Remove 3 Torx bolts and remove squab from
cushion.
6. Release rear of cushion cover from frame.
7. Release sides and front of cushion cover from
frame.
8. Release cover and pad from frame.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст