Freelander Body Repair Manual — part 48
BODY
SEATS AND SEAT BELTS
11
FINISHER - SEAT BASE - FRONT SEAT
Service repair no - 78.55.01
Remove
1. Remove front seat cushion side finisher.
See
this section.
2. Remove scrivet and 5 Torx screws from carpet
retainer.
3. Remove front carpet retainer.
4. Release cover to access Torx screw under
front seat, remove Torx screw.
5. Remove 2 Torx screws securing finisher to
seat runner.
6. Remove finisher.
Refit
1. Position finisher to seat runner.
2. Fit and tighten Torx screws.
3. Fit and tighten Torx screw under front seat and
close cover.
4. Fit front carpet retainer and secure with scrivet
and Torx screws.
5. Fit front seat cushion side finisher.
See this
section.
BODY
12
SEATS AND SEAT BELTS
FINISHER - CUSHION SIDE - FRONT SEAT
Service repair no - 78.55.06
Remove
1. Remove 2 covers to access screws.
2. Remove 3 screws securing finisher.
3. Release catches at front and side of seat and
remove finisher.
Refit
1. Position finisher to seat, locate catches, fit and
tighten securing screws.
2. Fit screw covers.
LUMBAR SUPPORT - FRONT SEAT
Service repair no - 78.60.07
Remove
1. Remove front seat.
See this section.
2. Release and remove head restraint.
3. Remove recline control knob.
4. Release retaining studs from side covers and
remove covers.
5. Remove 4 Torx bolts from squab frame and
remove squab frame from cushion frame.
6. Remove lumbar control knob.
7. Release squab cover at base of seat frame.
BODY
SEATS AND SEAT BELTS
13
8. Release squab cover from squab frame and
squab pad.
9. Remove and discard 2 hog rings from rear of
cover.
10. Drill out 2 pop rivet from squab frame.
11. Remove head restraint guide tubes.
12. Remove squab cover and pad.
13. Remove 2 bolts from cable control and release
cable control.
14. Release 8 lumbar support retainers from squab
frame and collect 4 hook retainers
15. Remove lumbar support mechanism.
Refit
1. Position lumbar support to squab frame, locate
hook retainers.
2. Fit lumbar support retainers to squab frame.
3. Position cable control and tighten bolts.
4. Fit squab cover and pad to frame.
5. Fit head restraint guide tubes.
6. Fit new hog rings to rear of cover.
7. Position straps and secure with pop rivets.
8. Fit squab cover to squab pad and frame.
9. Secure squab cover at base of frame.
10. Fit lumbar support control knob.
11. Fit squab frame to cushion frame and tighten
Torx bolts.
12. Fit side covers and secure retaining studs.
13. Fit head restraint.
14. Fit recline control knob.
15. Fit front seat.
See this section.
BODY
14
SEATS AND SEAT BELTS
LATCH ASSEMBLY - REAR SQUAB - RH
Service repair no - 78.80.05
Remove
1. Remove rear seat squab cover.
See this
section.
2. Remove 3 screws from lock button.
3. Remove 2 Torx screws from squab lock.
4. Release lock button from lock.
5. Release cable from abutment and remove from
lock.
6. Release cable from lever abutment and
remove from lever.
Refit
1. Position cable to lever and locate in abutment.
2. Fit cable to lock and locate in abutment.
3. Fit lock button to lock.
4. Fit Torx screws to squab lock.
5. Fit screws to lock button.
6. Fit squab cover.
See this section.
LATCH ASSEMBLY - REAR SQUAB - LH
Service repair no - 78.80.16
Remove
1. Remove rear seat squab cover.
See this
section.
2. Remove 2 Torx screws from squab lock.
3. Release cable from abutment and remove from
lock.
4. Release cable from lever abutment and
remove from lever.
Refit
1. Position cable to lever and locate in abutment.
2. Fit cable to lock and locate in abutment.
3. Fit and tighten Torx screws to lock.
4. Fit squab cover.
See this section.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст