Freelander Body Repair Manual — part 50
BODY
SEATS AND SEAT BELTS
19
5. Release squab from sides and bottom of
frame.
6. Release latch escutcheon and remove seat
frame back cloth.
7. Release cover from rear of frame.
8. Release and remove 2 head restraint guide
tubes.
9. Remove cover and pad from frame.
10. Remove 9 hog rings and remove cover from
pad.
Refit
1. Position squab cover to pad and secure hog
rings.
2. Fit cover and pad to squab frame.
3. Fit head restraint guide tubes.
4. Fit cover to sides and bottom of frame.
5. Fit cover to rear of frame .
6. Fit back cloth and secure latch escutcheon.
7. Fit head restraint.
8. Fit squab to cushion and tighten bolts.
9. Fit side covers and tighten screws.
10. Secure rear seat in locked position.
BODY
20
SEATS AND SEAT BELTS
SQUAB COVER - RH REAR SEAT - 5 DOOR
Service repair no - 78.90.13
Remove
1. Fold RH rear seat forward.
2. Remove 2 screws from seat belt reel cover and
remove cover.
3. Remove nut from seat belt reel, release reel
and position aside.
4. Remove 5 screws from end covers and remove
covers.
5. Remove 3 bolts from seat squab and remove
squab from cushion.
6. Remove both head restraints.
7. Remove arm rest aperture trim.
8. Remove 2 screws from arm rest and remove
arm rest.
BODY
SEATS AND SEAT BELTS
21
9. Release squab from arm rest aperture.
10. Release squab from seat belt aperture and
from rear of frame.
11. Release squab from sides and bottom of
frame. Release latch escutcheon and remove
back cloth.
12. Release and remove 4 head restraint guide
tubes.
13. Release squab lock warning button
escutcheon.
14. Remove cover and pad from frame.
BODY
22
SEATS AND SEAT BELTS
15. Remove 12 hog rings and remove cover from
pad.
Refit
1. Position squab cover to pad and secure hog
rings.
2. Fit cover and pad to squab frame.
3. Fit head restraint guide tubes and seat lock
warning button escutcheon.
4. Fit cover to sides and bottom of frame.
5. Fit cover to rear of frame and seat belt
aperture.
6. Fit back cloth and secure latch escutchion.
7. Fit cover to arm rest aperture.
8. Fit arm rest and tighten screws.
9. Fit arm rest aperture trim.
10. Fit head restraints.
11. Fit squab to cushion and tighten bolts.
12. Fit side covers and tighten screws.
13. Position seat belt reel and tighten nut to 32
Nm.
14. Fit seat belt reel cover and tighten screws.
15. Secure rear seat in locked position.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст