Freelander Body Repair Manual — part 49
BODY
SEATS AND SEAT BELTS
15
SQUAB COVER - FRONT SEAT
Service repair no - 78.90.08
Remove
1. Remove front seat.
See this section.
2. Release and remove head restraint.
3. Remove recline control knob.
4. Release retaining studs from side covers and
remove covers.
5. Remove 4 Torx bolts from squab frame and
remove squab frame from cushion frame.
6. Remove lumbar control knob.
7. Release squab cover at base of seat frame.
8. Release squab cover from squab frame and
squab pad.
9. Remove and discard 2 hog rings from rear of
cover.
10. Drill out 2 pop rivet from squab frame.
11. Remove head restraint guide tubes.
12. Remove squab cover and pad from frame.
13. Remove and discard 10 hog rings holding
cover to squab pad.
14. Remove squab cover.
BODY
16
SEATS AND SEAT BELTS
Refit
1. Position squab cover to pad.
2. Pull cover into position and secure with NEW
hog rings.
3. Fit squab cover and pad to frame.
4. Fit head restraint guide tubes.
5. Fit NEW hog rings to rear of cover.
6. Position straps and secure with pop rivets.
7. Fit squab cover to squab pad and squab frame.
8. Secure squab cover at base of squab frame.
9. Fit lumbar support control knob.
10. Fit squab frame to cushion frame and tighten
Torx bolts.
11. Fit side covers and secure retaining studs.
12. Fit recline control knob.
13. Fit head restraint.
14. Fit front seat.
See this section.
SQUAB COVER - REAR SEAT - 3 DOOR
Service repair no - 78.90.12
Remove
1. Remove rear seat assembly.
See this section.
2. Remove 2 screws securing console cover and
remove cover.
3. Remove 4 screws securing rear seat console
and remove console.
4. Remove 4 screws securing end covers and
remove covers.
5. Remove 4 Torx bolts and remove squab
assembly from cushion assembly.
BODY
SEATS AND SEAT BELTS
17
6. Release back board assembly from squab
frame and remove back board.
7. Remove head restraint.
8. Release bottom of squab cover from frame.
9. Release sides of squab cover from frame.
10. Raise cover and pad to access head restraint
guide tubes.
11. Remove guide tubes.
12. Release cover from top of frame.
13. Remove cover and pad.
BODY
18
SEATS AND SEAT BELTS
14. Release cover from pad, remove and discard 5
Hog rings.
15. Remove cover from pad.
Refit
1. Locate cover to pad and secure with NEW hog
rings.
2. Fit cover to pad.
3. Secure cover to top of frame.
4. Fit guide tubes.
5. Secure sides and bottom of cover to frame.
6. Fit head restraint.
7. Fit cushion to squab and tighten Torx bolts to
45 Nm.
8. Position back board and secure to frame.
9. Fit end covers and tighten screws.
10. Position rear seat console, fit and tighten
screws.
11. Position console cover, fit and tighten screws.
12. Fit rear seat.
See this section.
SQUAB COVER - LH REAR SEAT - 5 DOOR
Service repair no - 78.90.12
Remove
1. Fold LH rear seat forward.
2. Remove 5 screws from end covers and remove
covers.
3. Remove 3 bolts from seat squab and remove
squab from cushion.
4. Remove head restraint.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст