Jeep Grand Cherokee WK. Manual — part 63
3. Position Puller (1) Jaws 9641(2) around the case
bearing and puller flange.
4. Position Puller (1) Collar 6444-8 (2) around the
puller jaws.
5. Tighten the puller nut and remove differential case
bearing.
3 - 150
FRONT AXLE - C200FE
WK
INSTALLATION
CAUTION: Do not disturb the ELSD pump after
bearing has been removed. Failure to follow these
instructions will damage the pump seals.
1. Install differential case bearing with Installer 9535
(1) and Handle C-4171 (2).
GEAR-PINION/RING
REMOVAL
1. Remove differetial from housing.
2. Bend pinion nut lock tab back.
3. Remove pinion flange (1) nut with flange Holder
C-328 (2).
WK
FRONT AXLE - C200FE
3 - 151
4. Remove pinion flange (1) with Puller C-452 (2).
5. Drive pinion gear out of the housing with a soft
hammer.
6. Remove pinion seal (1) with a pry bar (2).
3 - 152
FRONT AXLE - C200FE
WK
7. Remove collapsible spacer (1) from pinion shaft
(2).
8. Remove spacer (1) from pinion shaft (2).
WK
FRONT AXLE - C200FE
3 - 153
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст