Jeep Liberty KJ. Manual — part 1307
FRONT FENDER
REMOVAL
1. Remove the wheel opening splash shield. (Refer to
23 - BODY/EXTERIOR/FRONT WHEELHOUSE
SPLASH SHIELD - REMOVAL)
2. Remove the grille. (Refer to 23 - BODY/EXTERI-
OR/GRILLE - REMOVAL)
3. Raise and support vehicle.
4. Release the inner support clips from within the fas-
cia between the lights.
5. Release the support tabs beneath the headlamps
and position the fascia assembly aside to access
the fender support bracket bolts.
6. Remove the front wheel opening flare moldings.
(Refer to 23 - BODY/EXTERIOR/FRONT WHEEL
OPENING FLARE MOLDINGS - REMOVAL)
7. Remove the fender support bracket bolts.
23 - 128
EXTERIOR
KJ
8. Remove the bolts and remove the fender.
9. Remove the antenna body, if equipped (1). (Refer
to 8 - ELECTRICAL/AUDIO/ANTENNA BODY &
CABLE - REMOVAL)
INSTALLATION
1. Install the antenna body (1), if equipped. (Refer to
8
-
ELECTRICAL/AUDIO/ANTENNA
BODY
&
CABLE - INSTALLATION)
KJ
EXTERIOR
23 - 129
2. Install the fender assembly (4) and install the bolts.
3. Install the fender support bracket (3) and install the
bolts.
4. Align the fender with adjacent body parts and
tighten the bolts to 12 N·m (9 ft. lbs.). (Refer to 23
- BODY/BODY STRUCTURE/GAP AND FLUSH -
SPECIFICATIONS)
5. Install the fascia assembly. (Refer to 13 - FRAME
&
BUMPERS/BUMPERS/FRONT
FASCIA
-
INSTALLATION)
6. Install the wheelhouse splash shield. (Refer to 23 -
BODY/EXTERIOR/FRONT
WHEELHOUSE
SPLASH SHIELD - INSTALLATION)
23 - 130
EXTERIOR
KJ
FUEL FILL DOOR/HOUSING
REMOVAL
1. Remove the fuel cap.
2. Remove the three screws connecting the fuel door/
housing to the filler neck.
3. Reach in through the opening and depress the tabs
(2) at the upper and bottom right of the door/hous-
ing.
4. Remove the fuel door/housing from the vehicle.
INSTALLATION
1. Position the fuel filler door/housing into the vehicle
and fully seat the tabs (2).
2. Install the three screws.
3. Install the fuel cap.
KJ
EXTERIOR
23 - 131
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст