Jeep Liberty KJ. Manual — part 940
REAR FASCIA - STEP PAD
REMOVAL
1. Remove the rear fascia (Refer to 13 - FRAME & BUMPERS/BUMPERS/REAR FASCIA - REMOVAL).
2. Remove the rain diverter (Refer to 13 - FRAME & BUMPERS/BUMPERS/REAR FASCIA - RAIN DIVERTER -
REMOVAL).
3. Remove the retaining clips and remove the step pads.
INSTALLATION
1. Install the step pads and new retainer clips.
2. Install the rain diverter (Refer to 13 - FRAME & BUMPERS/BUMPERS/REAR FASCIA - RAIN DIVERTER -
INSTALLATION).
3. Install the rear fascia (Refer to 13 - FRAME & BUMPERS/BUMPERS/REAR FASCIA - INSTALLATION).
13 - 8
FRAME & BUMPERS
KJ
REAR FASCIA - RAIN DIVERTER
REMOVAL
1. Open the swing gate.
2. Remove the three rivets from the diverter and
remove the diverter.
INSTALLATION
1. Install the diverter and install new rivets.
KJ
FRAME & BUMPERS
13 - 9
FRAME
SPECIFICATIONS
SPECIFICATIONS - FRAME DIMENSIONS
Frame dimensions are listed in metric scale. All dimensions are from center to center of Principal Locating Point
(PLP), or from center to center of PLP and fastener location.
VEHICLE PREPARATION
Position the vehicle on a level work surface. Using screw or bottle jacks, adjust the vehicle PLP heights to the
specified dimension above a level work surface. Vertical dimensions can be taken from the work surface to the
locations indicated were applicable.
NOTE: All measurements are in MM.
DIMENSION ILLUSTRATIONS
DESCRIPTION
FIGURE
TOP VIEW
( 1 )
SIDE VIEW
( 2 )
13 - 10
FRAME & BUMPERS
KJ
Fig. 1 BOTTOM VIEW
KJ
FRAME & BUMPERS
13 - 11
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст