Jeep Liberty KJ. Manual — part 1246
13.
Install new bearing with Tool Handle C-4171 (1)
and Installer 5066 (3). Lubricate bearing after
installation.
14. Install new seal in oil pump feed housing (3) with
Special Tool 7888 (2).
21 - 928
TRANSFER CASE - NV242
KJ
15. Install new pickup tube O-ring (1) in oil pump.
DIFFERENTIAL
1. Lubricate differential components with automatic
transmission fluid.
2. Install sprocket gear (1) in differential bottom case
(2).
KJ
TRANSFER CASE - NV242
21 - 929
3. Install differential planet gears (3) and new thrust
washers (2). Be sure thrust washers are installed
at top and bottom of each planet gear.
4. Install differential mainshaft gear (1).
5. Align and position differential top case (1) on bot-
tom case (2). Align using scribe marks (3) made at
disassembly.
6. While holding differential case halves together,
invert the differential and start the differential case
bolts.
7. Tighten differential case bolts to specified torque.
21 - 930
TRANSFER CASE - NV242
KJ
INPUT GEAR/LOW RANGE ASSEMBLY
1. Assemble low range gear (2), input gear thrust
washers, input gear (3), and input gear retainer (4).
2. Install low range gear snap-ring (1).
KJ
TRANSFER CASE - NV242
21 - 931
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст