Jeep Liberty KJ. Manual — part 1289
4. Install the speaker. (Refer to 8 - ELECTRICAL/AU-
DIO/SPEAKER - INSTALLATION)
23 - 56
DOOR - FRONT
KJ
WINDOW REGULATOR - MANUAL
REMOVAL
1. Remove the waterdam. (Refer to 23 - BODY/
DOOR - FRONT/WATERDAM - REMOVAL)
2. Raise the glass (4) to the position shown and using
a long flat blade or hook type tool, disengage clips
(1) attaching glass retainer to regulator lift plate (3).
3. Disconnect the glass from the regulator lift plate (3)
and re-install the clips (1).
4. Secure the glass (4) in the up position using a
wood wedge, tape or equivalent.
KJ
DOOR - FRONT
23 - 57
5. Loosen the bolts. (1, 2 and 5)
6. Disconnect the runout tube clip (4) and remove the
regulator (3).
INSTALLATION
1. Install the regulator assembly (3).
23 - 58
DOOR - FRONT
KJ
2. Tighten the bolts to 9 N·m (80 in. lbs.) using the
sequence shown.
3. Remove the glass support and connect to the reg-
ulator lift plate (3).
4. Install the waterdam. (Refer to 23 - BODY/DOOR -
FRONT/WATERDAM - INSTALLATION)
KJ
DOOR - FRONT
23 - 59
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст