Jeep Liberty KJ. Manual — part 1323
Rear Cargo Carpet
1. Remove the rivets (1) attaching the cargo hooks
(3) to the floor.
2. Remove the carpet (2).
INSTALLATION
Front Carpet
1. Install the carpet.
2. Install the jack assembly.
3. Install the B-pillar lower trim. (Refer to 23 - BODY/INTERIOR/B-PILLAR LOWER TRIM - INSTALLATION)
4. Install the cowl trim panels. (Refer to 23 - BODY/INTERIOR/COWL TRIM COVER - INSTALLATION)
5. Install the rear seats. (Refer to 23 - BODY/SEATS/SEAT - REAR - INSTALLATION)
6. Install the floor console. (Refer to 23 - BODY/INTERIOR/FLOOR CONSOLE - INSTALLATION)
23 - 192
INTERIOR
KJ
7. Install the front seats. (Refer to 23 - BODY/SEATS/SEAT - FRONT - INSTALLATION)
Rear Cargo Carpet
1. Install the carpet and slide under the trim panels.
2. Install new rivets securing the carpet and cargo
hooks to the floor.
KJ
INTERIOR
23 - 193
SHIFT BEZEL
REMOVAL
1. Using a trim stick C-4755 or equivalent, pry shift bezel out of the floor console.
INSTALLATION
1. Position the shift bezel and seat the retaining clips into the floor console.
23 - 194
INTERIOR
KJ
FLOOR CONSOLE
REMOVAL
1. Remove the shift bezel, if equipped. (Refer to 23 -
BODY/INTERIOR/SHIFT BEZEL - REMOVAL)
2. Set park brake lever in the up position.
3.
Using a trim stick C-4755 or equivalent, discon-
nect the manual trans shifter boot, if equipped.
4.
Using a trim stick C-4755 or equivalent, discon-
nect the transfer case shifter boot, if equipped.
5. Remove the four bolts.
6. Lift the console at the back and remove.
INSTALLATION
1. Position the front of the console and lower the rear
over the shifter and brake levers.
2. Install the bolts.
3. Install the shift boots and seat the retainer clips.
4. Install the shift bezel. (Refer to 23 - BODY/INTERI-
OR/SHIFT BEZEL - INSTALLATION)
KJ
INTERIOR
23 - 195
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст