Jeep Liberty KJ. Manual — part 1321
A-PILLAR TRIM AND GRAB HANDLE
REMOVAL
1. Using a small pry tool or equivalent, remove the
grab handle trim plugs (1).
2. Remove the two grab handle screws.
3. Remove the grab handle and A-pillar trim (2) from
the A-pillar.
INSTALLATION
1. Snap A-pillar trim (2) and grab handle into the
A-pillar.
2. Install the two screws and install the grab handle
trim plugs (1).
23 - 184
INTERIOR
KJ
COWL TRIM COVER
REMOVAL
1. Using a trim stick C-4755 or equivalent, lift up the
front edge of the lower B-pillar trim (4) and position
aside. (Refer to 23 - BODY/INTERIOR/B-PILLAR
LOWER TRIM - REMOVAL)
2. Remove the cowl trim cover (3) by pulling it away
from the A-pillar and releasing the clips (1 and 2).
KJ
INTERIOR
23 - 185
INSTALLATION
1. Install the cowl trim cover (3) and seat the retaining
clips (1 and 2).
2. Position the B-pillar trim panel (4) and seat the
retaining clips.
23 - 186
INTERIOR
KJ
DOOR SILL SCUFF PLATE
REMOVAL
1. Using a trim stick C-4755 or equivalent, pry up the
scuff plate releasing the retaining clips.
INSTALLATION
1. Position the scuff plate and seat the retaining clips.
KJ
INTERIOR
23 - 187
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст