Jeep Liberty KJ. Manual — part 1322
ASSIST HANDLE
REMOVAL
1. Using a small pry tool or equivalent, release the
assist handle by prying out the clips (3) at either
end.
INSTALLATION
1. Position the assist handle and seat the retaining
clips (3).
23 - 188
INTERIOR
KJ
B-PILLAR LOWER TRIM
REMOVAL
1. Using a trim stick C-4755 or equivalent, pry up the
trim panel (4), releasing the retaining clips.
INSTALLATION
1. Position the trim panel (4) and seat the retaining
clips fully.
KJ
INTERIOR
23 - 189
B-PILLAR UPPER TRIM
REMOVAL
1. Remove the lower B-pillar trim panel (4). (Refer to
23 - BODY/INTERIOR/B-PILLAR LOWER TRIM -
REMOVAL)
2. Remove the shoulder belt turning loop. (Refer to 8
-
ELECTRICAL/RESTRAINTS/SEAT
BELT
&
RETRACTOR - REMOVAL)
3. Using a trim stick C-4755 or equivalent, release the
trim retaining clips and remove the upper trim (1).
INSTALLATION
1. Position the upper trim panel (1) and seat the
retaining clips.
2. Install the seat belt turning loop. (Refer to 8 -
ELECTRICAL/RESTRAINTS/SEAT
BELT
&
RETRACTOR - INSTALLATION)
3. Install the B-pillar lower trim panel (4). (Refer to 23
-
BODY/INTERIOR/B-PILLAR
LOWER
TRIM
-
INSTALLATION)
23 - 190
INTERIOR
KJ
CARPETS AND FLOOR MATS
REMOVAL
Front Carpet
1. Remove front seats. (Refer to 23 - BODY/SEATS/SEAT - FRONT - REMOVAL)
2. Remove the floor console. (Refer to 23 - BODY/INTERIOR/FLOOR CONSOLE - REMOVAL)
3. Remove the rear seats. (Refer to 23 - BODY/SEATS/SEAT - REAR - REMOVAL)
4. Remove the cowl trim panels. (Refer to 23 - BODY/INTERIOR/COWL TRIM COVER - REMOVAL)
5. Remove the B-pillar lower trim. (Refer to 23 - BODY/INTERIOR/B-PILLAR LOWER TRIM - REMOVAL)
6. Remove the jack assembly.
7. Remove the carpet.
KJ
INTERIOR
23 - 191
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст