Jeep Liberty KJ. Manual — part 1325
QUARTER TRIM PANEL
REMOVAL
1. Using a trim stick C-4755 or equivalent, remove the
rear header trim.
2. Using a trim stick C-4755 or equivalent, remove the
rear sill plate.
3. Remove the hook pin type connector.
4. Fold down the rear seat.
5. Remove the seat belt anchor and pivot. (Refer to 8
-
ELECTRICAL/RESTRAINTS/SEAT
BELT
&
RETRACTOR - REMOVAL)
6. Remove the belt access panel.
7. Remove the storage cover.
8. Disconnect the 12v power supply electrical connec-
tor, if equipped.
INSTALLATION
1. Position the 12v power supply electrical connector,
if equipped.
2. Install the storage cover.
3. Install the belt access panel.
4. Install the seat belt anchor and pivot. (Refer to 8 -
ELECTRICAL/RESTRAINTS/SEAT
BELT
&
RETRACTOR - INSTALLATION)
5. Install the hook pin type connector.
6. Position the rear sill plate and seat the retaining
clips.
7. Position the rear header trim and seat the retaining
clips.
23 - 200
INTERIOR
KJ
REAR DOOR SCUFF PLATE
REMOVAL
1. Using a trim stick C-4755 or equivalent, release the
retaining clips and remove the scuff plate.
INSTALLATION
1. Position the scuff plate and seat the retaining clips.
KJ
INTERIOR
23 - 201
SUN VISOR
REMOVAL
1. Remove the screws at the visor pivot.
2. Disconnect the electrical connector and remove the visor.
INSTALLATION
1. Connect the electrical connector and install the visor.
2. Install the screws at the visor pivots.
23 - 202
INTERIOR
KJ
SUN VISOR SUPPORT
REMOVAL
1. Using a small pry tool or equivalent, release the
support retaining clip by prying out and remove the
support.
INSTALLATION
1. Position the visor support and seat the retaining
clip.
KJ
INTERIOR
23 - 203
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст