Geely FC. Manual part — 86
Geely FC. Manual part - 86
Panel/combination instrument-- panel
3 Fixing clamp
4 Fixing clasp
5. Disassemble safety airbag assembly at the side of
driver [67010011] (Referring to page 261)
6. Disassemble steering wheel assembly [67010001]
(referring to page 194)
7. Disassemble Combination instrument cover
[68000077]
(a) Disassemble fixing clamp.
(b) Use screw driver to unclench three fixing clamps and four
fixing clasps, then disassemble Combination instrument.
Hint: before using screw driver, it is necessary to wrap
its needled top with adhesive tape.
8. Disassemble Combination instrument assembly
[67000081]
(a) Disassemble A screw.
(b) Liking that shown in figure, unclench two fixing clamps.
(c) Disassemble the joint, then disassemble Combination in-
strument assembly.
9. Disassemble panel left ventilation hole assembly
[68010010]
Use disassembling tool for trim tape to disassemble panel left
ventilation hole assembly.
Hint: before using screw driver, it is necessary to wrap its
needled top with adhesive tape.
10. Disassemble panel right ventilation hole assembly
[68010011]
11. Disassemble front ashtray
12. Disassemble shift organization trim board assem-
bly [68000076]
(a) Use screw driver to unclench six fixing clamps.
Hint: before using screw driver, it is necessary to wrap
its needled top with adhesive tape.
(b) Disassemble the joint, then disassemble shift organization
trimmain board.
341
4 Fixing clasp
6 Fixing clamp
Panel/combination instrument-- panel
<F>
8 Fixing
clamp
8 Fixing
clamp
< >
Fixing clamp
2 Fixing clasp
4 Fixing clamp
4 Fixing clasp
13. Disassemble air conditioner control panel assem-
bly [67000148]
(a) Use screw driver to unclench four fixing clamps and four
fixing clasps, then disassemble air conditioner control panel
assembly.
Hint: before using screw driver, it is necessary to wrap
its needled top with adhesive tape.
(b) Disassemble the joint.
14. Disassemble CD machine assembly [67000126]
(a) Disassemble two E self tapping screws and two F bolts.
(b) Use screw driver to unclench eight fixing clamps, then dis-
assemble DVD assembly and panel central ventilation hole
assembly.
Hint: before using screw driver, it is necessary to wrap
its needled top with adhesive tape.
(c) Disconnect panel central ventilation hole assembly.
15. Disassmble lower panel right storage box assem-
bly [68100008]
(a) Disassemble A screw and gas spring on storage box.
(b) Bend upper part of storage box to release gas spring.
(c) Pull put storage box upwards.
16. Disassemble right front pillar inner trim board as-
sembly [68010017]
(a) Unclench two fixing clamps.
(b) Pull out right front pole inner trim board upwards.
17. Disassemble left front pole inner trim board assem-
bly [68010014]
18. Disassemble the joint of safety airbag assembly at
the side of passenger (referring to page 263)
342
Panel/combination instrument-- panel
6 Fixing clamp
5 Fixing clasp
19. Disassemble upper panel assembly [68010004]
(a) Disassemble D bolt and two A screws.
(b) Use disassembling tool for trim tape to unclench six fixing clamps.
(c) Disassemble upper panel assembly.
20. Disassemble upper/lower trim board of steering column [64000128/64000129]
21. Disassemble left combination switch assembly [67000078] (referring to page 298)
22. Disassemble right combination switch assembly [64000079] (referring to page 302)
23. Disassemble gas spring
Unclench fixing clamp, then disassemble gas spring.
343
24. Disassemble evaporator ventilation pipe assembly
[67000149]
Disassemble four fixing clamps and evaporator ventilation pipe
assembly.
gas
spring
Panel/combination instrument-- panel
L
4 Fixing
clasp
3 Fixing
clasp
Fixing
clamp
25. Disassemble parking brake hole cover.
Use screw driver to unclench four fixing clamps, then disas-
semble parking brake hole cover.
Hint: before using screw driver, it is necessary to wrap its
needled top with adhesive tape.
26. Disassemble auxiliary panel assembly [68010002]
(a) Disassemble two L bolts, two C bolts and auxiliary panel
assembly.
27. Disassemble right front door pedal trim board
[68010021]
Use screw driver to unclench three fixing clamps, then disas-
semble right front door pedal trim board.
Hint: before using screw driver, it is necessary to wrap its
needled top with adhesive tape.
28. Disassemble left front door pedal trim board
[68010020]
29. Disassemble lower inner trim board of right de-
fender [68010016]
(a) Disassemble plastic nuts of lower inner trim board of right
defender.
(b) Unclench fixing clamp, then disassemble lower inner trim
board of right defender liking that shown in figure.
30. Disassemble lower inner trim board of left defender
[68010015]
31. Disassemble connecting board at the middle of
panel [68010006]
(a) Use screw driver to unclench four fixing clamps, then open
the connecting board at the middle of panel.
Hint: before using screw driver, it is necessary to wrap
its needled top with adhesive tape.
(b) Disassemble connecting board at the middle of panel.
344
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст