Geely Emgrand X7. Manual part — 297
Geely Emgrand X7. Manual part - 297
3.4.8.2 Vehicle speed sensor replacement
Warning: Refer to warning for battery disconnection in the warning and precaution .
Dismantle procedure
1. Disconnect the vehicle speed sensor harness
connector.
FE03-0003b
2. Dismantle speed sensor fixing bolt A.
Notes : Clip plate B is active as shown in the figure
!
B
A
FE03-0004b
3. Dismantle the circlip as shown in the figure,
disassemble the vehicle speed sensor driven gear.
FE03-0005b
1187
4. Disassembled
speed
sensor.
FE03-0006b
Installation procedure::
1. Install driven gear of speed sensor,
FE03-0007b
2. Install the driven gear clamp spring.
FE03-0008b
1188
3. Install the vehicle speed sensor and tighten the
bolt, pay attention to the position of the washer.
FE03-0009b
4. Connect the vehicle speed sensor harness
connector, as shown in the figure.
FE03-0010b
1189
3.4.8.3 Transmission replacement
Dismantle procedure
Warning: refer to warning for lifting vehicle in warnings and precautions.
NL03-0011b
1. Dismantle battery negative cable , refer to
2.11.8.1 disconnect connecting process of battery
cable
2. Dismantle battery,refer to2.11.8.2 battery
replacement.
3. Dismantle base seat of air filter.
4. Disconnect reverse door lamp switch harness
connector.
5. Disconnect the vehicle speed sensor harness
connector.
6. Disconnect the crankshaft position sensor harness
connector.
7. Dismantle shift control lever cable plug, refer to
3.3.8.4 shift control mechanism assembly
replacement.
8. Dismantle the shift lever bracket;
NL03-0012b
1190
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст