Geely Emgrand X7. Manual part — 646
Geely Emgrand X7. Manual part - 646
11.14.3 System operating principle
11.14.3.1 Warning lamp control
When starting the ignition switch in position ON at every turn, the multifunctional instrument
inspects the warning lamp by itself, and the self-check process lasts for 3s; and when the warning
lamp circuit faults or receives a signal of compelling to turn on the fault warning lamp, turn on the
fault lamp to remind the driver.
The following warning lamps in the multifunctional instrument are directly controlled by
hardware as follows:
–
Sub-safety belt unsecured warning lamp
– Tire-pressure
warning lamp
11.14.4 Component position
11.14.4.1 Component position
1
NL11-2238b
1. Multi-function instrument
2583
11.14.5 Disassemble drawings
11.14.5.1 Disassemble drawings
NL11-2239b
1
2
1. Functional
instrument
2. Multi-functional
instrument
cover.
2584
11.14.6 Electrical schematic diagram
11.14.6.1 Electrical schematic diagram
NL11-4026b
Battery power
supply
Lighting
adjusting
Combination
instrument
Multifunction
instrument
2585
11.14.7 Diagnostic information and procedures
11.14.7.1 Diagnostic Information and procedures
After being familiar with the system function and the operation content and then start the system
diagnosis, so that it is conducive to the determination of the correct steps of fault diagnosis in the
event of a failure; what's more, it is further conducive to determining whether the condition
described by the customer belongs to the normal operation.
11.14.7.1 Diagnostic information and steps
–
Inspect the after-sales optional device which may affect the normal operation of
multi-functional instrument.
–
Inspect components easy to access system to identify whether there is a significant damage
that may lead to the fault.
–
Inspect whether the system of each instrument displaying information is in normal condition.
2586
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст