Geely Emgrand X7. Manual part — 243
Geely Emgrand X7. Manual part - 243
2.13.8.3 Replacement of Drive Belt
Dismantlement Procedure
Warning: Refer to "Warning on
Battery Disconnection" in "Warning
and Precautions".
1. Disconnect the battery negative
electrode cable. Refer to 2.11.8.1
Battery Disconnection.
2. Rotate drive belt tensioner in
clockwise by using wrench, and
take out drive belt.
Note: prevent the spanner from
slippage in the process of removing
to damage to the operator!
FE01-0019b
Installation Procedure:
1. Wrap the drive belt as shown.
FE01-0020b
2. Rotate the drive belt tensioner
clockwise with a wrench to
install the drive belt.
FE01-0021b
971
3. Release drive belt tensioner to
normal position.
Important precaution : Before
releasing the tensioner device,
confirm the drive belt aligned with
drive pulley groove, otherwise the
drive belt may be damaged.
4. Connect battery negative cable.
FE01-0022b
972
2.13.8.4 Replacement of Drive Belt Tensioner
Dismantlement Procedure
1. Disconnect the battery negative
electrode cable.
Refer
to
2.11.8.1 Battery Disconnection.
2. Refer to 2.13.8.1 "Replacement
of Plastic Shield of Engine" to
dismantle the engine shied.
3. Refer to 2.13.8.3 "Replacement
of Drive Belt" to dismantle the
drive belt.
FE02-0086b
4. Dismantle upper fixing nut of
drive belt tensioner.
FE02-0087b
5. Dismantle the fixing bolts of
drive belt tensioner pulley
bracket.
FE02-0088b
973
Installation Procedure:
1. Install drive belt tensioner
support bolt.
Torque :69N . m(Metric) 51 .
1lb-ft(English system)
FE02-0089b
2. Install fixing nut on the bracket
of drive belt tensioner.
Torque :29N . M(Metric) 21 .
5lb-ft(English system)
3. Install the drive belt.
4. Install the engine hood.
5. Connect battery negative cable.
FE02-0090b
974
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст