Geely Emgrand X7. Manual part — 257
Geely Emgrand X7. Manual part - 257
3. Install
the
valves.
FE02-0215b
4. Install the valve spring pads.
FE02-0216b
5. Install the valve springs.
FE02-0217b
1027
6. Install the valve spring seat.
FE02-0218b
7. Use a special tool to compress
the valve springs and install the
valve spring locking pieces.
FE02-0219b
8. Confirm locking pieces is in
place. slowly remove the special
tool with a wood hammer gently
knock the valve, so that the valve
is in place.
Warning: Do not apply excessive
force, otherwise the valve spring
might pop up and cause personal
injury.
9. Install the valve lifter.
10.
Install the cylinder hood
assembly.
FE02-0220b
1028
2.13.8.16 Replacement of Piston, Connecting Rod and Connecting Rod Bearing
Dismantlement Procedure
1. Dismantle
the
engine. Refer
to
2.13.8.13 Replacement of
Engine.
2. Refer to 2.13.8.14 "Replacement
of Cylinder Hood Assembly" to
dismantle the cylinder hood.
3. Dismantle oil pan, refer to 2.9.8.3
Replacement of Oil Pan.
4. Dismantle
the
filters.
FE02-0221b
5. Rotate the crankshaft, so that the
cylinder NO.1 and 4 are at BDC
positions. Dismantle the cylinder
NO.1 rod bearing cap bolts.
FE02-0222b
6. Hold the connecting rod bolts
and take out the Cylinder #1
connecting rode bearing cap and
mark the Cylinder #1 position on
the bearing cap.
FE02-0223b
1029
7. Drive #1 cylinder piston and
connecting rod assembly with a
wooden stick and mark the
position of #1 cylinder on the
piston and connecting rod
assembly.
FE02-0224b
8. Remove the bolt for the #4
cylinder connecting rod bearing
cover.
FE02-0225b
9. Hold the connecting rod bolts
and take out the Cylinder #4
connecting rode bearing cap and
mark the Cylinder #4 position on
the bearing cap.
FE02-0226b
1030
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст