Geely Emgrand X7. Manual part — 577
Geely Emgrand X7. Manual part - 577
11.6.8.9 Replacement of wiper and washer switch
Dismantlement procedure
Warning!
Warning: refer to warning on battery disconnection in warnings and precautions.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. Turn the steering wheel and
dismantle the upper and lower
steering column shield panel
retaining screws.
NL11-0144b
3. Dismantle the lower steering
column shield screw.
4. Remove the steering column
upper and lower shield panels.
NL11-0145b
5. Disconnect the wiper switch
harness connector.
NL11-0146b
2307
6. Press the switch tongue at the top
to dismantle the wiper switch.
7. Dismantle the wiper switch.
NL11-0147b
Installation procedure:
1. Install the wiper switch into the
switch housing.
NL11-0148b
2. Connect the wiper switch harness
connector.
NL11-0149b
2308
3. Install screws of upper, lower
steering column cover plate.
Torque: 8.8Nm (Metric) 6.5
lb-ft(English system)
Notes:
Refer to "important cautions for
fastening parts".
4. Connect the battery negative
cable.
NL11-0150b
2309
11.6.8.10 Replace wiper motor
Dismantlement procedure
Warning!
Warning: refer to warning on battery disconnection in warnings and precautions.
1. Disconnect the battery negative cable. Refer to 2.11.8.1 battery cable
disconnection/connection procedures.
2. For dismantling of wiper piece,
refer to 11.5.8.1 replacement of
non-bone wiper piece.
3. For dismantling of wiper arm,
refer to 11.5.8.2 replacement of
front wiper arm.
4. Dismantle the ventilation cover
plate. Refer to 12.10.1.3
Replacement of ventilation cover
plate.
5. Disconnect the wiper motor
harness connector.
NL11-0051b
6. Dismantle the fixing bolts of
wiper connecting rod.
NL11-0052b
2310
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст