Geely Emgrand X7. Manual part — 578
Geely Emgrand X7. Manual part - 578
7. Extract the wiper connecting rod
and motor assembly.
NL11-0053b
8. Remove the wiper motor bolt and
nut.
NL11-0054b
Installation procedure:
1. Install wiper motor and tighten
bolt and nut.
Notes:
See "important cautions regarding
fastening parts" in "warnings and
cautions".
Torque: 8Nm(Metric) 6lb-ft(English
system)
NL11-0155b
2311
2. Install wiper connecting rod with
motor assembly into U groove.
NL11-0053b
3. Install and tighten fixing bolt of
wiper connecting rod.
NL11-0152b
4. Connect
the
wiper motor harness
connector.
5. Install the ventilation cover plate.
6. Install the wiper arm.
7. Install the wiper blade.
8. Connect the battery negative
cable.
NL11-0156b
2312
11.6.8.11 Replacement of rear wiper motor
Dismantlement procedure
Warning!
Warning: refer to warning on battery disconnection in warnings and precautions.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. Dismantle rear wiper piece.
3. For dismantling of rear wiper
arm, refer to 11.5.8.3
Replacement of rear wiper arm.
4. Remove the external fixing nut
cap of the rear wiper motor.
NL11-0157b
5. Remove the external fixing bolt
of the rear wiper motor.
NL11-0158b
6. For dismantlement of rear back
door internal trim panel, see
12.9.1.10 Replacement of Back
Door Trim Panels.
7. Disconnect the rear wiper motor
harness connector.
NL11-0159b
2313
8. Dismantle the fixing bolts of rear
wiper motor.
9. Dismantle the rear wiper motor.
NL11-0160b
Installation procedure:
1. Install rear wiper motor and
tighten bolt.
Notes:
See "important cautions regarding
fastening parts" in "warnings and
cautions".
Torque:10Nm(Metric) 7.4lb-ft(English
system)
NL11-0160b
2. Connect rear wiper motor wire
harness connector.
3. Install inner trimming plate of
back door.
NL11-0161b
2314
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст