Geely Emgrand X7. Manual part — 534
Geely Emgrand X7. Manual part - 534
Torque: 5Nm (Metric system) 3.7lb-ft
(English system)
2. Install the rear fog lamp
assembly.
NL11-0255b
3. Conect wire harness connector of
electric device of combined lamp
assembly.
4. Install the rear bumper.
5. Connect the battery negative
cable.
NL11-0256b
2135
11.4.8.6 Replacement of high mounted brake lamp
Dismantlement procedure
Warning!
Warning: refer to warning on battery disconnection in warnings and precautions.
1. For disconnection of negative
cable of battery, refer to 2.11.8.1
Disconnection procedures of
battery cable.
Connection procedures.
2. For dismantling of upper
trimming plate of back door
frame, refer to 12.9.1.10
Replacement of back door
trimming plate.
3. Disconnect the high mounted
brake lamp harness connector.
NL11-0257b
4. Dismantle fixing nut of spoiler.
NL11-0258b
5. Remove the fixing bolt of the
high braking light.
NL11-0259b
2136
Installation procedure:
1. Install the high mounted brake
lamp and tighten the fixing
screws.
Torque:5Nm(Metric) 4lb-ft(English
system)
NL11-0259b
2. Install spoiler and tighten it with
fixing nut.
Torque:10Nm(Metric) 7.4lb-ft(English
system)
NL11-0258b
3. Connect the high mounted brake
lamp harness connector.
4. Install upper trimming plate of
rear back door frame.
5. Connect the battery negative
cable.
NL11-0260b
2137
11.4.8.7 Replacement of headlamp
Dismantlement procedure
Notes:
A light height adjusting motor is internally arranged in a headlamp assembly.
Warning!
Warning: refer to warning on battery
disconnection in warnings and
precautions.
1. Disconnect the battery negative
cable. Refer to 2.11.8.1 battery
cable disconnection/connection
procedures.
2. For dismantling of front bumper,
refer to 12.4.3.1 Replacement of
front bumper.
3. Front
bumper
replacement.
NL11-0261b
4. Disconnect wire harness
connector under headlamp
assembly.
NL11-0262b
2138
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст