Geely Emgrand X7. Manual part — 690
Geely Emgrand X7. Manual part - 690
12. Dismantle left side fixing bolt of sunvisor
hook .and take out sunvisor hook. Right sunvisor
hook dismantle method is same with it
NL12-0182b
13. Dismantle the second row middle safety belt lock
tone box trimming cover.
NL12-0183b
14. Dismantle 2 buckles at the back of top trimming
plate.
NL12-0184b
2759
15. Dismantle 2 buckles in the middle of top
trimming plate.
NL12-0185b
16. Dismantle 2 buckles on front of top trimming
plate.
17. Lay down rear-row seat, dismantle top trimming
plate, and move the trimming plate out of boot.
NL12-0186b
Installation Procedure:
Notes:
Fixed buckle must be replaced by new part.
1. Flat on rear row seat, make ceiling trim plate
move in the vehicle from trunk Install the roof
trim panel.
2. Keep the top trimming plate flatly attach on the
top inside vehicle.
3. Install 2 buckles on the front of top trimming
plate.
NL12-0186b
2760
4. Install 2 middle buckles of top trimming plate.
NL12-0185b
5. Install the trim cover of the lock tongue case for
the middle seat belt on the second row seat.
NL12-0182b
6. Install and tighten the fixing bolt for the left
sunvisor hanging hook. Right sunvisor hook
installing method is same with it
Torque: 8 Nm (Metric) 5.9 lb-ft (English system)
NL12-0183b
2761
7. Install the left sunvisor fixing bolt.
Torque: 8 Nm (Metric) 5.8 lb-ft (English system)
NL12-0188b
8. Install the trim cover at the fixing bolt of the left
sunvisor. Right sunvisor installing method is
same with it
NL12-0189b
9 . Install right front safety handle fixing bolt .
Torque: 8 Nm (Metric) 5.8 lb-ft (English system)
NL12-0178b
2762
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст