Geely Emgrand X7. Manual part — 689
Geely Emgrand X7. Manual part - 689
8. Disengage 8 fixing buckles of the back door
bottom trim panel.
9. Dismantle the internal trim panel of the back
door.
NL12-0175b
Installation Procedure:
Notes:
Fixed buckle must be replaced by new part.
1. Align 8 buckles of back door inner trimming
plate with mounting holes, and press trimming
plate buckle.
NL12-0175b
2. Install 1 fixing screw and 3 buckles under back
door trimming plate.
NL12-0174b
2755
3. Align 2 buckles on left upper trimming plate of
back door with mounting hole, press buckle of
trimming plate.
4. Install fixing screw of left upper inner trimming
plate of back door.
5. Install the top right internal trim panel on the
back door in the same way.
NL12-0173b
6. Align 4 buckles of the middle and top internal
trim panels of the back door to the installation
holes and press the trim panel to engage the
buckles.
NL12-0172b
2756
12.9.1.11 Top cover interior trim plate replacement
Dismantlement Procedure
Warning!
Warning: Refer to "Warning on Battery
Disconnection" in "Warnings and Precautions".
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Cable
Disconnection/Connection Procedures
.
2. For dismantling of 4-door doorsill inner
trimming plate, refer to
12.9.1.1 Replacement of
left/ right front doorsill inner trimming plate
assembly.
3. For dismantling of front column trimming plate,
refer to
12.9.1.2 Replacement of upper trimming
plate assembly of left/right front vertical column
.
NL12-0176b
4. For dismantling of middle column trimming
plate, refer to
12.9.1.3 Replacement of middle
column trimming plate
.
5. For removal of the rear pillar trim panel, see
12.9.1.6 Replacement of Rear Pillar Upper Trim
Panel
.
6. For dismantlement of the in-vehicle reading
lamp, see
11.3.8.2 Replacement of Roof Lamp
and Reading Lamps
.
7. Dismantle 3 in-vehicle roof safety handles and
front 2 sunvisors.
8. Dismantle the decoration covers on both sides of
the front right safety handle.
NL12-0177b
2757
9. Remove the fixing bolt of the front right safety
handle and the safety handle. The disassembly of
the left rear and right rear safety handles is the
same.
NL12-0178b
10. Dismantle trimming cover at fixing bolt of left
sun shield.
NL12-0179b
11. Dismantle fixing screw of left sun shield, and
then dismantle lower left sun shield.
NL12-0180b
2758
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст