Geely Emgrand X7. Manual part — 683
Geely Emgrand X7. Manual part - 683
15. Connect wire harness connector between engine
compartment wire harness and fuse box.
NL12-0257b
16. Connect 2 connectors between instrument panel
wire harness and right front door wire harness.
NL12-0256b
17. Connect 5 connectors between instrument panel
wire harness and engine wire harness and floor
wire harness.
NL12-0255b
2731
18. Connect to 3 harness connectors of instrument
panel harness and ceiling harness.
19. Install mechanical steering column assembly.
20. Install the instrument panel.
21. Connect the battery negative cable.
NL12-0273b
2732
12.9 Interior trim
12.9.1 Dismantle and install
12.9.1.1 Left /right front doorsill inner trim plate assembly replacement
Dismantlement Procedure
Notes:
Dismantle the front left/right threshold trim panel
assembly with body repair tool; otherwise the internal
threshold trim panel edge will be easily scratched.
1. Remove previous section of front door frame
sealing strip.
2. Upward draw inner trimming plate of front
doorsill.
NL12-0138b
3. Dismantle lower trimming plate assembly of
front vertical column.
NL12-0139b
4. Uncover a section of the rear door frame sealing
bar.
5. Pull up the rear threshold internal trim panel
assembly and extract.
NL12-0140b
2733
Installation Procedure:
1. Install rear doorsill inner trimming plate
assembly.
2. Install rear door frame sealing strip.
NL12-0141b
3. Install lower trimming plate assembly of front
column.
NL12-0142b
4. Install inner trimming plate assembly of doorsill.
5. Install the front door frame sealing strips.
Notes:
Same way of dismantle and install of left /right
doorsill inner trim plate
NL12-0143b
2734
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст