Geely Emgrand X7. Manual part — 144
Geely Emgrand X7. Manual part - 144
2.8.8.4 Replacement of Thermostat
4G20/4G24engine :
Dismantlement Procedure
1. Disconnect the battery negative
electrode cable.
Refer
to
2.12.6.1 Battery Disconnection.
2. Refer to 2.8.8.1 Engine Coolant
Discharge and Filling to
discharge engine coolant.
3. Loosen the radiator pipe clamp
from the engine inlet pipe seat.
4. Disconnect the radiator outlet
pipe from the engine inlet pipe.
GC02-0094c
5. Dismantle the engine inlet seat
retaining nuts.
6. Dismantle the engine inlet seat.
GC02-0095c
7. Remove
the
thermostat
component from the water pump
housing.
Note: the thermostat and the seal
ring are integrated.
8. Clean contact surface between
the engine water inlet pipe joint
components and cylinder.
GC02-0096c
575
Installation Procedure:
1. Install the thermostat to the water
pump housing.
2. Install the inlet seat and tighten
the retaining nuts.
Torque: 8-10 N.m (Metric) 5.9-7.4
lb-ft (English system)
GC02-0097c
3. Connect the outlet pipe of the
radiator to the inlet pipe seat.
4. Tighten the radiator outlet pipe
clamp.
5. Fill the engine coolant.
6. Connect battery negative cable.
GC02-0094c
576
4G18engine
Dismantlement Procedure
Warning: Refer to "Warning on Maintenance of Cooling System" in "Warnings and
Precautions".
1. Discharge the engine coolant,
Refer to 2.8.8.1 Engine Coolant
Discharge and Filling
2. Loosen radiator water pipe clamp
from engine water intake pipe
joint assemblies.
NL02-0312b
3. Disconnect water outlet pipe of
radiator from engine water intake
pipe joint components.
NL02-0313b
4. Dismantle fixing nut from engine
water inlet pipe joint components
to cylinder block.
NL02-0314b
577
5. Dismantle the engine water inlet
pipe joint components from the
cylinder.
NL02-0315b
6. Dismantle thermostat from the
cylinder.
Note: the thermostat and the seal ring
are integrated.
7. Clean contact surface between
the engine water inlet pipe joint
components and cylinder.
NL02-0316b
Installation Procedure:
1. Install thermostat onto the
cylinder.
2. Install the engine water inlet pipe
joint components onto the
cylinder.
NL02-0317b
578
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст