Geely Emgrand X7. Manual part — 628
Geely Emgrand X7. Manual part - 628
4. Install fixing bolt on the rear of
electric seat.
Torque: 45Nm (Metric) 33. 3 lb-ft
(English system)
5. Install the front and rear bottom
protective covers for the power
seat.
6. Connect the battery negative
cable.
NL11-0408b
2511
11.10.8.2 Replace seat side trim plate
Dismantlement procedure
1. For dismantling of electric seat,
refer to 11.9.8.1 Replacement of
front electric seat.
2. Dismantle screw of left trimming
plate of seat.
NL11-0409b
3. Dismantle screw of right
trimming plate of seat.
NL11-0410b
4. Disconnect electric seat adjusting
switch wire harness connector.
5. Remove the power seat
adjustment switch.
NL11-0411b
2512
Installation procedure:
1. Install electric seat adjusting
switch.
2. Connect electric seat adjusting
switch wire harness connector.
3. Install and tighten fixing screw of
electric seat adjusting switch.
Torque: 4Nm(Metric) 3lb-ft(English
system)
NL11-0412b
4. Install trimming plate on right
side of electric seat, and tighten it
with screw.
NL11-0410b
5. Install and tighten the left trim
panel of the power seat with
screws.
Torque : 4Nm(Metric) 3lb-ft(English
system)
6. Install the power seat.
NL11-0409b
2513
11.9.8.3 Power seat adjuster assembly replacement
Dismantlement procedure
1. For dismantling of electric seat,
refer to 11.9.8.1 Replacement of
front electric seat.
2. For dismantling of seat side
trimming plate, refer to 11.9.8.2
Replacement of seat side
trimming plate.
3. Disconnect adjusting motor
harness connector.
NL11-0413b
4. Dismantle left fixing bolt.
NL11-0414b
5. Remove the right fixing bolt.
NL11-0415b
2514
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст