Geely Emgrand X7. Manual part — 664
Geely Emgrand X7. Manual part - 664
9. Install Upper trim plate of front bumper.
Torque: 8 Nm (Metric) 5.9 lb-ft (English system)
10. Connect the battery negative cable.
NL12-0051b
2655
12.4.3.2 Front cross beam replacement
Dismantlement Procedure
1. Dismantle front bumper. Refer to
12.4.3.1
Replacement of Front Bumper.
2. Dismantle 6 fixing bolts on front horizontal beam
body.
NL12-0056b
3. Dismantle 4 fixing bolts on each of energy
absorption beam of left and right front horizontal
beams.
NL12-0057b
Installation Procedure:
1. Install horizontal beam 4 fixing bolts on left and
right sides of engery absorption beam.
Torque : 73Nm(Metric) 54lb-ft(English system)
NL12-0057b
2656
2. Install 6 fixing bolt of front horizontal beam
body.
Torque : 73Nm(Metric) 54lb-ft(English system)
3. Install front bumper.
NL12-0056b
2657
12.4.3.3 Rear bumper replacement
Warning!
Warning: Refer to "Warning on Battery Disconnection" in "Warnings and Precautions".
Dismantlement Procedure
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Cable Disconnection/Connection
Procedures.
2. Dismantle 2 screws and 2 buckles under the rear
bumper.
NL12-0058b
3. Dismantle 2 screws respectively on left and right
sides of the upper section of rear bumper.
4. Detach the rear bumper from the installation
bracket.
NL12-0059b
5. Disconnect the harness connectors of the left and
right rear fog lamps.
NL12-0060b
2658
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст