Geely Emgrand X7. Manual part — 665
Geely Emgrand X7. Manual part - 665
6. Disconnect the harness connector of the parking
radar sensor.
7. Dismantle the left and right rear fog lamp
assembly and 3 parking radar sensors.
NL12-0061b
8. Dismantle the rear right bumper mounting
bracket.
NL12-0062b
9. Dismantle the rear left bumper mounting bracket.
NL12-0063b
2659
Installation Procedure:
1. Install left rear bumper mounting support and
fixed screw.
Torque: 5 Nm (Metric) 3.7 lb-ft (English system)
NL12-0063b
2. Install Right rear Bumper mounting support and
tighten screw.
Torque: 5 Nm (Metric) 3.7 lb-ft (English system)
NL12-0062b
3. Installleft and right rear fog assembly and 3
parking radar sensors.
4. Connect the rear fog lamp harness connector.
NL12-0064b
2660
5. Connect the harness connector of the parking
radar sensor.
NL12-0065b
6. Install the rear bumper.
7. Install and tighten the left and right 2 screws on
the top of the rear bumper.
Torque : 4Nm(Metric) 3lb-ft(English system)
NL12-0059b
8. Install 2 screws and 2 buckles on the bottom of
the rear bumper and tighten the screws.
Torque : 4Nm(Metric) 3lb-ft(English system)
NL12-0058b
2661
12.4.3.4 Rear cross beam replacement
Dismantlement Procedure
1. For dismantling of rear bumper, refer to
12.4.3.3
Replacement of rear bumper.
2. Loosen wire harness buckle on rear horizontal
beam.
NL12-0066b
3. Dismantle 3 fixing bolts on left and right sides of
rear horizontal beam.
NL12-0067b
Installation Procedure:
1. Install 3 fixing bolts respectively on left and right
sides of rear horizontal beam and tighten them.
Torque: 25Nm (Metric) 18. 5lb-ft(English system)
NL12-0067b
2662
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст