Geely Emgrand X7. Manual part — 300
Geely Emgrand X7. Manual part - 300
5. Dismantle fixing clip plate of selecting lever
cable, take out selecting control lever cable.
NL03-0034b
6. Dismantle self-lock bolt of shift shaft as shown
in figure
NL03-0035b
7. Dismantle 4 bolts as shown in the figure.
NL03-0036b
1199
8. Take out shift control mechanism assembly.
Notes : Gears must be is in the netural position as
shown in figure, otherwise .control mechanism can
not be took out, pay attention to make sure return
spring is in free status in the transmission at moment
time, otherwise , it easily dropped in the transmission
NL03-0037b
Installation procedure::
1. Confirm shift fork is in the neutral position in the
transmission as shown in figure
NL03-0038b
2. Install return spring on the fixing hole.and
confirm whether it is installed in the correct
position.
NL03-0039b
1200
3. First confirm of control sliding block position
shift control mechanism assembly is in the level
position before installed
NL03-0040b
4. Before install shift control mechanism
assembly.Coat sealant on the joint surface. And
then install shift control mechanism assembly
and tighten foot fixing bolts.
NL03-0041b
5. Install and tighten self-lock bolt of shift shaft.
NL03-0042b
1201
6. Install fixing clip plate of selecting lever cable
position
NL03-0043b
7. Install fixing clip plate of shift lever cable
position
8. Install shift lever selecting rod control rod cable
plug
9. Install air filter.
10. Install the battery.
NL03-0044b
1202
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст