Geely EC718, EC718RV, EC715, EC715RV. Manual part — 166
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 166
FE02-0419b
1.
Disconnect the battery negative cable. Refer to
.
2.
Disconnect the generator harness connector.
FE02-0420b
3.
Remove the generator charging wiring harness retaining
nut.
FE02-0421b
4.
Remove the drive belt. Refer to
5.
Remove the generator lower retaining bolt.
Engine
Starting / Charging System JL4G18-D
2-579
FE02-0422b
6.
Remove the generator upper retaining bolt.
7.
Remove the generator from the generator bracket.
Installation Procedure:
FE02-0423b
1.
Install and tighten the generator upper retaining bolt.
Torque: 25 Nm (Metric) 18.5 lb-ft (US English)
FE02-0424b
2.
Install and tighten the generator lower retaining bolt.
Torque: 54 Nm (Metric) 40 lb-ft (US English)
2-580
Starting / Charging System JL4G18-D
Engine
FE02-0425b
3.
Install the drive belt.
4.
Install the generator charging wiring harness and tighten
the harness retaining nut.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
FE02-0426b
5.
Connect the generator harness connector.
6.
Connect the battery negative cable.
2.11.8.4 Starter Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnection Warning" in "Warnings
and Notices"
FE02-0427b
1.
Disconnect the battery negative cable. Refer to
.
2.
Disconnect starter control wiring harness connector.
Engine
Starting / Charging System JL4G18-D
2-581
FE02-0428b
3.
Remove the starter power supply wiring harness retaining
nut.
FE02-0429b
4.
Remove the starter power supply wiring harness.
FE02-0430b
5.
Remove the starter upper retaining bolt.
2-582
Starting / Charging System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст