Geely EC718, EC718RV, EC715, EC715RV. Manual part — 165

FE02-0408b

3.

Disconnect battery positive cable.

Connecting Procedure:

FE02-0409b

1.

Connect battery positive cable, and tighten the retaining
nut.

Torque: 10.3 Nm (Metric) 7.6 lb-ft (US English)

L

OCK ACC

O

N

S

TA

RT

FE02-0410b

2.

Make sure the ignition switch is turned to "OFF" position.

Engine

Starting / Charging System JL4G18-D

2-575

FE02-0411b

3.

Connect the battery negative cable.

Torque: 10.3 Nm (Metric) 7.6 lb-ft (US English)

2.11.8.2 Battery Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnection Warning" in "Warnings
and Notices".

FE02-0412b

1.

Disconnect battery positive and negative cables. Refer to

2.11.8.1

Battery Disconnection

.

2.

prior to Remove
Remove the radiator upper grille retaining clips, and
remove the radiator upper grille from the front bumper.

FE02-0413b

3.

Remove the battery bracket retaining bolts and nuts.

2-576

Starting / Charging System JL4G18-D

Engine

FE02-0414b

4.

Remove the battery.

FE02-0415b

5.

Remove the battery bracket.

Installation Procedure:

FE02-0416b

1.

Install the battery bracket.

Note

The battery bracket is retained by two convex sets,
pay attention during installation align the convex
with the bracket holes.

Engine

Starting / Charging System JL4G18-D

2-577

FE02-0414b

2.

Install the battery.

FE02-0417b

3.

Install the battery bracket and tighten the nuts and bolts.

Torque: 13 Nm (Metric) 9.6 lb-ft (US English)

FE02-0418b

4.

Install the radiator upper grille.

5.

Connect the battery positive and negative cables.

2.11.8.3 Generator Replacement

Removal Procedure:

Warning!

Refer to "Battery Disconnection Warning" in "Warnings
and Notices".

2-578

Starting / Charging System JL4G18-D

Engine