Geely EC718, EC718RV, EC715, EC715RV. Manual part — 112
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 112
FE02-0167b
2.
Install timing chain and crankshaft sprocket and align the
first yellow chain section with the crankshaft sprocket
timing mark.
Note
There are total three yellow sections on the timing
chain, including two yellow chain section (a
difference of 6 links between the sections) and
aligned with the intake and exhaust camshaft
sprocket timing marks.
FE02-0168b
3.
Align the second yellow chain section with the intake cam
VVT actuator sprocket timing mark.
FE02-0169b
4.
Align the third yellow chain section with the exhaust
sprocket timing mark.
Engine
Engine Mechanical System JL4G18-D
2-363
FE02-0170b
5.
Install the timing chain guide rail components.
FE02-0171b
6.
Install the timing chain guide rail components retaining
bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
FE02-0172b
7.
Install the tensioner rail components.
2-364
Engine Mechanical System JL4G18-D
Engine
FE02-0173b
8.
Install the tensioner rail components retaining bolts.
Torque: 19 Nm (Metric) 14 lb-ft (US English)
FE02-0158b
9.
Install the crankshaft sprocket.
10. Install the timing chain cover and accessories.
Engine
Engine Mechanical System JL4G18-D
2-365
2.6.8.11 Timing Chain Inspection
FE02-0175b
1.
Remove the timing chain cover. Refer to
2.
Remove the timing chain. Refer to
3.
Inspect timing chain guide rail component for cracking,
wear and tear.
4.
If the timing chain guide rail components surface wear is
deeper than 1 mm (0.04 in) then replace the timing chain
guide rail components.
5.
Inspect timing chain tensioner rail component for wear
and tear.
6.
If the timing chain guide rail components surface wear is
deeper than 1 mm (0.04 in) then replace the timing chain
guide rail components.
7.
Inspect timing chain and sprocket for VVT actuator wear.
8.
Inspect the exhaust camshaft sprocket teeth and the VVT
actuator sprocket teeth and chain for excessive wear,
damage or stuck.
9.
Inspect the crankshaft timing sprocket teeth and chain for
excessive wear, damage, or stuck.
10. Inspect timing chain tensioner for damaged and gasket
intact. If damaged, replace the timing chain tensioner and
the gasket.
FE02-0176b
11. Inspect timing chain lubrication nozzles. If necessary,
remove the oil pump assembly. Check the oil channel.
Refer to
2-366
Engine Mechanical System JL4G18-D
Engine
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст