Geely EC718, EC718RV, EC715, EC715RV. Manual part — 528

12.10.1.4 Rear Compartment Lid Applique
Replacement

Removal Procedure:

FE12-0096b

1.

Open the rear compartment lid and remove the rear
compartment lid applique retaining nuts.

FE12-0097b

2.

Remove the rear compartment lid.

Installation Procedure:

FE12-0098b

1.

Install the rear compartment lid applique retaining nuts.

Torque: 10 Nm (Metric) 7.4 lb-ft (US English)

2.

Close the rear compartment lid.

Body, Sheet Metal and Painting

Exterior Trim

12-101

12.10.1.5 Hatchback Outside ornament Panel
replacement (Hatchback)

Removal Procedure:

FE12-0099c

1.

Remove the rear quarter upper trim panels. Refer to

12.9.1.10

Rear Compartment Trim Panel Replacement

(Hatchback)

.

2.

Remove the hatchback outside ornament panel retaining
screw.

FE12-0100c

3.

Remove the hatchback outside ornament panel.

Note

The hatchback outside ornament panel back has a
double-sided stick tape.

Installation Procedure:

FE12-0101c

1.

Install and tighten the hatchback outside ornament panel
retaining screw.

Torque: 2 Nm (Metric) 1.5 lb-ft (US English)

2.

Install the rear quarter upper trim panels.

12-102

Exterior Trim

Body, Sheet Metal and Painting

12.10.1.6 Roof Ornament Panel Replacement

Removal Procedure:

FE12-0102b

1.

Use a flat blade screwdriver to remove the roof ornament
panel.

Note

Wrap the screwdriver blade with a tape to protect
components.

Installation Procedure:

FE12-0103b

1.

Install the roof ornament panel to the roof weld joint.

Body, Sheet Metal and Painting

Exterior Trim

12-103

12.10.1.7 Left and Right Engine Bottom Shield
Replacement

Removal Procedure:

FE12-0210b

1.

Lift and support the vehicle.

2.

Remove the left and right engine bottom shield retaining
screws and clips on both sides.

FE12-0211b

3.

Remove all the engine bottom shield retaining screws and
clips except one retaining clip to stabilize the engine
bottom shield.

4.

Use a hand to support the engine bottom shield and
remove the last retaining clip.

Installation Procedure:

FE12-0211b

1.

Install the right engine bottom shield and the retaining
clips.

2.

Install the left engine bottom shield and the retaining clips.

12-104

Exterior Trim

Body, Sheet Metal and Painting