Geely EC718, EC718RV, EC715, EC715RV. Manual part — 403
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 403
Installation Procedure:
FE11-0241b
1.
Insert and tighten the new fog lamp bulb to the fog lamp
assembly.
Note
Avoid touching the bulb or letting the bulb to come
into contact with any moist. When the lamp is turned
on, the grease or moisture on the bulb may cause
the bulb explode. If the bulb contacts with grease or
moisture, clean the bulb with alcohol or an
appropriate cleaning agent and dry the bulb.
2.
Tighten the fog lamp retaining bolts.
Torque: 5.5 Nm (Metric) 4 lb-ft (US English)
3.
Connect the fog lamp wiring harness connector.
4.
Install the engine bottom shield.
5.
Connect the battery negative cable.
Note
Hatchback front fog lamp replacement is the same
as sedan.
11.4.8.8 Rear Fog Lamp Replacement (Sedan)
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0242b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the rear bumper. Refer to
Body Electric
Lighting System
11-125
2
2
1
2
2
FE11-0243b
3.
Disconnect the wiring harness connector (1).
4.
Remove the rear fog lamp retaining bolts.
5.
Remove the rear fog lamp bulb.
Installation Procedure:
FE11-0244b
1.
Insert and tighten the fog lamp bulb to the rear fog lamp
assembly.
Note
Avoid touching the bulb or letting the bulb to come
into contact with any moist. When the lamp is turned
on, the grease or moisture on the bulb may cause
the bulb explode. If the bulb contacts with grease or
moisture, clean the bulb with alcohol or an
appropriate cleaning agent and dry the bulb.
FE11-0245b
2.
Install the rear fog lamp assembly.
Torque: 5.5 Nm (Metric) 4 lb-ft (US English)
11-126
Lighting System
Body Electric
FE11-0246b
3.
Connect the tail lamp assembly electrical wiring harness
connector.
4.
Install the rear bumper.
5.
Connect the negative battery connector.
11.4.8.9
High
Mounted
Brake
Lamp
Replacement (Sedan)
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
FE11-0248b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the rear parcel shelf. Refer to
Parcel Shelf Replacement (Sedan)
.
Body Electric
Lighting System
11-127
FE11-0249b
3.
Disconnect the high mounted brake lamp wiring harness
connector.
FE11-0250b
4.
Remove the high mounted brake lamp retaining screws.
5.
Remove the high mounted brake lamp.
Installation Procedure:
FE11-0251b
1.
Install the high mounted brake lamp and tighten the
retaining screws.
Torque: 3.5 Nm (Metric) 2.5 lb-ft (US English)
11-128
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст