Geely EC718, EC718RV, EC715, EC715RV. Manual part — 409
Geely EC718, EC718RV, EC715, EC715RV. Manual part - 409
Installation Procedure:
1
3
2
FE11-0296b
1.
Rotate the brake lamp switch locking nut to the top
position.
2.
Press the brake pedal to the end.
3.
Install the brake lamp switch into the mounting hole (2).
Note
Do not fully tighten the screw.
4.
Slowly release the brake pedal until the brake lamp switch
contacts fully pressed in because of brake pedal reaction.
5.
Tighten the locking nut (3).
Torque: 10 Nm (Metric) 7 lb-ft (US English)
6.
Connect the brake lamp switch harness connector (1).
7.
Connect the battery negative cable.
11.4.8.18 Turn Signal Lamp Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the outside rearview mirror glass. Refer to
Outside Rearview Mirror Replacement
3.
Disconnect the turn signal lamp wiring harness connector
(1).
4.
Remove the retaining screw (2).
Body Electric
Lighting System
11-149
FE11-0298b
5.
Remove the turn signal lamp.
Installation Procedure:
FE11-0299b
1.
Install the turn signal lamp.
1
2
FE11-0300b
2.
Install the turn signal lamp retaining screw (1).
Torque: 1.5 Nm (Metric) 1.1 lb-ft (US English)
3.
Connect the turn signal lamp wiring harness connector
(2).
4.
Install the outside rearview mirror glass.
5.
Connect the battery negative cable.
11-150
Lighting System
Body Electric
11.4.8.19 Instrument Background Light
Adjustment Switch and Headlamp Height
Adjustment Switch Replacement
Removal Procedure
FE11-0206b
1.
Remove the instrument background light switch.
2.
Disconnect the dimmer switch wiring harness connector.
3.
Remove the switch.
Installation Procedure:
FE11-0207b
1.
Install the switch.
2.
Connect the switch wiring harness connector.
3.
Install the switch panel to the instrument panel.
11.4.8.20 Ambient and Sun Light Sensor
Replacement
Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
Body Electric
Lighting System
11-151
FE11-0208b
1.
Disconnect the battery negative cable. Refer to
.
2.
Remove the ambient and sun light sensor from the
instrument panel.
3.
Disconnect the ambient and sun light sensor harness
connector.
Installation Procedure:
1.
Connect the ambient and sun light sensor harness
connector.
2.
Install the ambient and sun light sensor to the instrument
panel.
3.
Connect the battery negative cable.
11-152
Lighting System
Body Electric
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст